Philips CDR-776 Search, Shuffle random order play, Repeat CD, track or program, Programming tracks

Page 25
Repeat steps 2 and 3 for all tracks to be erased.
REPEAT ALL

xp CDR 775/00.1 english 10-07-2001 13:19 Pagina 25

Search

EASY JOG

STORE/

CANCEL/

CD

MENU

DELETE

 

 

 

ENTER

 

1 Hold down 5 or 6 (in Play mode).

➜The player first searches backwards or forwards at

10 times normal speed with sound at low volume, then goes to 50 times normal speed with sound muted.

2 Release the button at the desired passage.

➜Play will start at the desired passage.

Note: During Shuffle, Repeat Track or Programmed play, search is restricted to within the track being played at the time.

Shuffle (random order) play

Only in Changer mode.

1 Press SHUFFLE before or during CD play to start shuffle play.

➜The tracks on the CD (or program if set) will play in random order.

2 Press SHUFFLE again to return to normal CD play.

➜CD recorder goes to Stop mode.

Note: Shuffle is also cleared when you open the disc tray.

Repeat CD, track or program

1 Press repeat one or more times during CD play.

➜When REPEAT TRACK lights up, the current track will play repeatedly. When REPEAT ALL lights up, the entire disc or program plays repeatedly.

2 To return to normal play, press REPEAT one or more times until:

➜The REPEAT text disappears from the display.

Note:

You can use shuffle in combination withor programmed play.

REPEAT is also cleared when you open the disc tray.

Programming tracks

0You can program up to 99 tracks to play in any desired sequence.

0Tracks can be programmed more than once, but each time

counts as a track (STEP).

Playing

0A program for playback can be made from both the disc in the recorder deck and the disc in the player deck. A program for recording can only be made from the disc in the player deck.

Programming

1 Select Changer mode or DJ mode using the DJ MODE key.

➜CHANGER or DJ MODE appears on the display.

2 Press CDR or CD to select the required deck.

➜Selected key lights up.

3 In Stop mode press PROG to enter Program mode.

➜PROG flashes and PROGRAM followed by track information appears on the display.

4 Select the desired track numbers by turning the EASY JOG/ENTER key left or right and store by pressing ENTER.

or:

Key in a track number with the number keys and press ENTER to confirm. For 2-digit numbers, press the keys in rapid succession.

➜The track will be stored in the program.

➜The track number, total program time and the number of programmed tracks (STEPS) are displayed.

5

Repeat step 4 for all tracks to be programmed.

6

Press STOP 9 or PROG to end programming.

 

➜ PROG lights continuously.

7

Press PLAY/PAUSE 2; to start programmed play.

 

Notes:

 

To review the program, press PROGRAM, followed

 

by 5 or 6 with the CD recorder in Stop mode.

 

To add more tracks to the program, repeat steps 3 to 7.

 

If you try to store more than 99 tracks, PROG FULL will

 

appear on the display.

1

Clearing a program

Press STOP 9 if necessary to stop programmed play.

2

Press STOP 9 again to clear the program.

 

➜ PROG will disappear from the display.

0The program is also cleared when you open the disc tray.

1

Erasing a track from a program

In Stop mode press PROG to enter Program mode.

2

Use 5 or 6 to select the track from to be deleted.

 

➜ The track number and program step will be shown on

 

the display.

3 Press CANCEL/DELETE to erase the track from the program.

➜The remaining program steps and the remaining playing time on the program will be displayed.

4

5 Press STOP 9 or PROG to end erasing.

➜PROG will light up continuously.

English

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Audio Important notes for users in the U.K Mains plug English Français Español Deutsch Nederlands Italiano139 IndexTable of contents General information Technical dataWelcome About this manualAccessories MaintenanceDiscs for recording Discs for playbackCD recorder Operating buttonsCD player Display indications Display messages DisplayGeneral RecordingPlay Menu messagesOthers Menu messagesWhich connections do you need? ConnectionsExplanation of connections For playback on the CD recorderAnalog connections How to connect your recorderDigital connections This will be the case in DJ-modeDigital optical connection Power supply/MainsDigital coaxial connections via a digital receiver Inserting batteries in the remote control Remote controlRemote control commands Number/alphabet keys 0Inserting discs Recording generalGeneral information on recording IntroductionFor recording from external sources By programming tracks first, a compilation can be recordedRecording an entire CD How to record from the internal deckPreparing RecordingPress Record to start recording the program Recording a single trackRecording from internal deck Adjusting recording levelRecording from external source Do not start recordingTrack increments How to record from an external sourceTip See Finalizing CDR and Cdrw discsAutostart recording Finalizing CDR & Cdrw discs FinalizingUnfinalizing Cdrw discs For Cdrw discs onlyErasing Erasing Cdrw discs contentFor unfinalized Cdrw discs only To erase one or more tracks from the endPlaying CDs on Deck 1 and Deck 2 simultaneously DJ mode Playing CD’s Changer modePlaying Selecting a trackShuffle random order play SearchRepeat CD, track or program Programming tracksRemarks about Menu mode Menu modeMenu active in Recording or Stop mode General operation of MenuText input Update will appear on the displayErasing text Auto track increment Reviewing CD text in memoryBalance This feature is only active in Record/Standby modeYourself as this will invalidate the guarantee Fixing problemsThese hints, consult your dealer or service centre Laser safety3104 125 CMM/JS/0122 Meet Philips at the Internet
Top Page Image Contents