InDut Voltage Selection

INVERTER OPERATIONDIP SWITCH

SETTINGS (SUIOKPM SHOWN)

Using a small tool, set the four Inverter Opera- tion DIP Switches (located on the rear panel of your UPS, see pg. 4-5for location) to match your input voltage, input frequency a n d desired operational mode.

( D ~ Pswitch& # 1 ~r #2)

(Input Voltage Select Terminal Block)

These DIP switches and the Input Terminal Select Block must BOTH be set to match your input voltage. Your UPS WILL NOT CONVERT the voltage.

		Input Voltage
J n ~ uVolt=	DIP Switch Position	Select Terminal Block

240V #1 DOWN & #2 DOWN

Invut Frequencv Selection

(DIP Switch #3)

Your Input Frequency setting MUST match your input frequency. Your UPS WILL NOT CONVERT the frequency.

Input Frequency DIP Switch Position

6 0 Hz

#3DOWN

Overational Mode Selection

(DIP Switch #4)

The "On-Line"Mode provides on-line operation with zero transfer time. The "Economy" Mode provides line-interactive operation for increased efficiencywhen on-line protection is unnecessary, thus reducing operating costs without affecting your UPS'S output reliability during a power outage.

Input Frequency	DIP Switch Position
On-Line	#4 UP
Economy	#4 DOWN