Alarm Silence

Basic Operation

Front Panel Switches

“ON/TEST” Switch: This switch controls four separate UPS functions:

UPS Power ON

To turn the UPS on, press this switch, hold it for several seconds until you hear a beep, then release it. The “ON LINE” LED will illuminate.

UPS Self-Test

During normal on-line operation, press this switch and hold it until you hear a beep. This initiates a 10-second self-test of the battery. The UPS will shift to battery power (the “ON BATT” and “BATT ACTIVE METER” LEDs will illuminate) for ten seconds.

To silence the UPS “on-battery” alarm, press this switch and hold it until you hear a beep.

UPS Cold Start

To use your UPS as a stand-alone power source when AC power is unavailable (i.e. during a blackout), press this switch and hold it until you hear a beep. The UPS will then provide battery power to its outlets.*

*The “ON BATT” Indicator Light will be illuminated since your UPS will be operating from battery power.

“OFF” Switch: This switch turns power OFF at the UPS receptacles. Press this switch, hold it until you hear a beep, then release it. The UPS will continue charging and the fan will continue to cool internal components even after you turn the UPS receptacles off. To turn the UPS OFF completely, including the charger, disconnect the UPS’s power cord after pressing the “OFF” switch.

Front Panel Indicator Lights

“ON LINE” LED: This green light will illuminate constantly to indicate the UPS is performing normal on-line operation (filtering and resynthesizing incoming AC line voltage to provide pure sine wave output). When this light is illuminated, you can monitor the load level of your UPS on the “LOAD ACTIVE METER” LEDs.

“LINE” LED: This green light will illuminate constantly to indicate the utility supplied AC line voltage at your wall outlet is nominal. It will flash if the line voltage is outside the nominal range (either too low or two high). No action is required on your part when the LED flashes; the UPS continuously and automatically filters AC line power to provide your equipment with pure sine wave AC power, regardless of brownout or overvoltage conditions. If this light is off, then AC line voltage is not present (blackout) or is at an extremely high voltage, and the UPS will provide connected equipment with power from battery.

SU1000RTXL2UHV, SUINT1000RTXL2U, SU1000RTXL2U specifications

The Tripp Lite SU1000RTXL2U, SUINT1000RTXL2U, and SU1000RTXL2UHV are advanced uninterruptible power supply (UPS) solutions designed to provide reliable power management for critical electronic equipment. Ideal for data centers, telecommunication systems, and sensitive electronics in both home and office settings, these UPS units are engineered to ensure continuous power supply during outages and fluctuations.

One of the standout features of the Tripp Lite SU1000RTXL2U is its high capacity, offering 1000VA/900W of power, which accommodates a wide range of devices. It employs advanced line-interactive technology that extends battery life and maximizes backup performance. With a pure sine wave output, users can rest assured that their equipment receives clean power, reducing wear and tear on electronics.

The SUINT1000RTXL2U is specifically designed for environments that require seamless integration with networking and IT systems. It provides a broad input voltage range, which helps protect against utility power fluctuations. This model is notably equipped with Advanced SmartBoost technology, enhancing power performance by allowing the UPS to compensate for voltage sags and surges.

For users needing enhanced runtime, the SU1000RTXL2UHV variant stands out with support for external battery packs. This extendable architecture allows businesses to scale their backup times according to operational needs, ensuring uninterrupted service during extended outages. Furthermore, its hot-swappable batteries facilitate easy maintenance without interrupting power to connected devices.

These models feature multiple outlets, ensuring that users have ample connectivity for their devices. The included LCD display provides real-time information about battery status, load levels, and key operating parameters, ensuring that users can monitor their power environment effectively.

In addition to their robust features, these units are designed with compact and rack-mountable configurations in mind, making them suitable for a variety of setups, including server rooms and workstations where space is at a premium.

Tripp Lite’s commitment to quality is evident, as all these UPS models meet stringent safety and performance standards, adding an extra layer of assurance for users relying on these systems to maintain critical operations. Whether for home office setups or corporate infrastructure, the SU1000RTXL2U, SUINT1000RTXL2U, and SU1000RTXL2UHV deliver exceptional performance for all power management needs.