Rear Panel

Basic Operation (continued)

Front Panel Indicator Lights continued

“REPLACE BATT” LED: This red light will illuminate constantly and the UPS alarm will sound three beeps* if your UPS’s microprocessor detects a battery fault or if your UPS fails the automatic self-test (after you turn your UPS ON) and the UPS battery is less than fully charged. Let the UPS system charge for at least 12 hours and perform a self test using the "ON/Test Switch" as described on page 6. If the light continues to stay on, contact Tripp Lite for service.

*After the initial alarm, the UPS will beep once every hour until the problem is corrected.

Accessory Slot: Remove the small cover panel from this slot to use optional accessories to remotely monitor and control your UPS. Contact Tripp Lite Customer Support at (773) 869-1234 for more information, including a list of available SNMP, network management and connectivity products.

External Battery Pack Connector: Use to connect optional Tripp Lite Battery Packs for additional runtime. Contact Tripp Lite Customer Support at (773) 869-1234 for the appropriate Tripp Lite battery pack to connect. Refer to instructions available with the Battery Pack for complete connection information and safety warnings.

Fan: The fan cools the UPS’s internal components. It is always on when line power is present.

TVSS Cover Plate: Remove this plate to install optional modem/network surge protection modules, available for purchase by special arrangement with Tripp Lite.

Input Circuit Breaker Switch: This resettable breaker prevents high input current from damaging the UPS or the attached load. If this breaker trips, make sure your UPS is connected to AC power of the proper voltage before resetting the circuit breaker by pushing the breaker switch in.

Input Receptacle (Select Models Only): Connect one end of the detachable line cord into this receptacle and the other into your wall outlet.

SU1000RTXL2UHV, SUINT1000RTXL2U, SU1000RTXL2U specifications

The Tripp Lite SU1000RTXL2U, SUINT1000RTXL2U, and SU1000RTXL2UHV are advanced uninterruptible power supply (UPS) solutions designed to provide reliable power management for critical electronic equipment. Ideal for data centers, telecommunication systems, and sensitive electronics in both home and office settings, these UPS units are engineered to ensure continuous power supply during outages and fluctuations.

One of the standout features of the Tripp Lite SU1000RTXL2U is its high capacity, offering 1000VA/900W of power, which accommodates a wide range of devices. It employs advanced line-interactive technology that extends battery life and maximizes backup performance. With a pure sine wave output, users can rest assured that their equipment receives clean power, reducing wear and tear on electronics.

The SUINT1000RTXL2U is specifically designed for environments that require seamless integration with networking and IT systems. It provides a broad input voltage range, which helps protect against utility power fluctuations. This model is notably equipped with Advanced SmartBoost technology, enhancing power performance by allowing the UPS to compensate for voltage sags and surges.

For users needing enhanced runtime, the SU1000RTXL2UHV variant stands out with support for external battery packs. This extendable architecture allows businesses to scale their backup times according to operational needs, ensuring uninterrupted service during extended outages. Furthermore, its hot-swappable batteries facilitate easy maintenance without interrupting power to connected devices.

These models feature multiple outlets, ensuring that users have ample connectivity for their devices. The included LCD display provides real-time information about battery status, load levels, and key operating parameters, ensuring that users can monitor their power environment effectively.

In addition to their robust features, these units are designed with compact and rack-mountable configurations in mind, making them suitable for a variety of setups, including server rooms and workstations where space is at a premium.

Tripp Lite’s commitment to quality is evident, as all these UPS models meet stringent safety and performance standards, adding an extra layer of assurance for users relying on these systems to maintain critical operations. Whether for home office setups or corporate infrastructure, the SU1000RTXL2U, SUINT1000RTXL2U, and SU1000RTXL2UHV deliver exceptional performance for all power management needs.