Installation
Rack Mounting
Mount your equipment in either a
4-Post Mounting
All UPS models include hardware required to mount in a
1Connect the two segments of each shelf A using the included screws and nuts B . Leave the screws slightly loose so that the shelves can be adjusted in the next step.
2Adjust each shelf to fit your rack, then mount them in the lowest available space of your rack with the screws, nuts and washers provided C . Note that the support ledges should face inward. Tighten the screws that connect the shelf segments B .
3Attach mounting ears D to the front mounting holes of your equipment E using the screws provided F . The ears should face forward.
4Using an assistant if necessary, lift your equipment and slide it onto the mounting shelves. Attach your equipment to the rack by using the appropriate hardware G through its mounting ears and into the rack rails.
B |
A |
1 |
C |
2 | B |
| |
E |
|
D | F |
3 |
|
G |
|
4 |
|
3