InstallationImporant (continued)Safety Instructions
Connection and
1 Plug your UPS’s line cord into an electrical outlet.
Your UPS must be connected to a dedicated circuit of sufficient amperage. Note, however, that the select models may be fitted with different plug types. Refer to the “OP Rating/ Plug Rating” chart printed on the top of your UPS.
Once your UPS is plugged in, the fan and all Indicator Lights will turn ON. The “LINE” and “LOAD ACTIVE METER” LEDs will illuminate and the UPS will emit a beep to indicate normal operation. However, power is not supplied to your UPS’s AC outlets until the UPS is turned on.
2Plug your equipment into your UPS.
Your UPS is designed to support audio/video systems and their associated servers, Media Center PCs, and a Tripp Lite HT3100PC Power Conditioning Center only. The total number of components connected should not exceed UPS capacity. This will overload your UPS system. You will also overload your UPS if you connect household appliances to the UPS's outlets.
3Turn your UPS ON:
•Press the “ON/TEST” Button
•Hold it for several seconds until you hear a beep
•Release it
Your UPS will begin providing AC power to its outlets. The “ON LINE” LED will illuminate.
Optional Connections
1 | Your model may differ. |
2 Your model may differ. |
3 |
Your UPS will function properly without these connections.
1Phone Line or Phone/Network Line Surge Suppression
Your UPS has jacks which protect against surges on a phone line. Select models feature jacks which also protect against surges on a network line.* Using appropriate telephone or network cords connect your wall jack to the UPS jack marked “IN.” Connect your equipment to the UPS jack marked “OUT.” Make sure the equipment you connect to the UPS's jacks is also protected against surges on the AC line.
* Not compatible with PoE (Power Over Ethernet) applications.
1 Your model may differ. |
5