Tripp Lite MRV2012UL Input, Battery, Leds Alarms & Switches, Surge / Noise Suppression, Physical

INPUT

Input connection	DC INPUT: Set of 2 DC terminal posts. AC INPUT: hardwire
type
Input cord length	DC INPUT: User supplies cabling. 0 gauge or larger (see manual). AC INPUT: hardwire
Recommended	DC INPUT: Requires 12V DC input source capable of delivering 190A for the required duration (when used at full
Electrical Service	continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). For automotive
	applications, professional hardwire
Maximum input	DC INPUT: Full continuous load - 190A at 12V DC. AC INPUT: 38 amps at 120V AC with full inverter and charger load
amps / watts	(20A max charger-only / combined input load to support charger and AC output is automatically controllable to
	66%-33%-0% based on AC output l
BATTERY

Expandable battery runtime

DC system voltage

Battery recharge rate

Runtime is expandable with any number of user-supplied wet or gel type batteries

12V

25A /100A (user-selectable)

LEDS ALARMS & SWITCHES

Front panel LEDs

Switches

6 LEDs offer continuous status information on load (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.

3-position on/off/remote switch enables simple on/off power control plus auto/remote setting that enables distant on/off control of the inverter system when used in conjunction with APSRM4 accessory (sold separately) in inverter mode. In AC uninterruptibl

SURGE / NOISE SUPPRESSION

AC surge	Heavy-duty Isobar AC surge suppression included
suppression
PHYSICAL
Shipping weight (lbs)	46.6
Shipping weight (kg)	21
Shipping	13.5 x 15 x 21.5
Dimensions
(HWD/in)

Shipping Dimensions (HWD/cm)

34.3 x 38.1 x 54.6

Unit weight (lbs)	43.2
Unit weight (kg)	19.4
Unit Dimensions	8 x 10.5 x 17.5
(HWD/in)
Unit Dimensions	20.3 x 26.7 x 44.5
(HWD/cm)
Material of	Polycarbonate/aluminum
construction
Form factors	Mounting slots enable secure placement of inverter on any horizontal surface (see manual for additional mounting
supported	information)
Cooling method	Multi-speed fan
Included accessories	Battery temperature sensor cable; conduit hanger
Style	Heavy-duty with built-in battery charger
ENVIRONMENTAL
Relative Humidity	0-95% non-condensing

LINE / BATTERY TRANSFER

Transfer time from line power to battery mode

16.6 ms (typical - compatible with many computers - verify transfer time compatibility of loads for UPS applications)