Samsung LT-P1745U Memorizing the Channels

English-16

OPERATION

Memorizing the Channels

Your TVcan memorize and store all of the available channels for both “off-air” (antenna)

and cable channels. After the available channels are memorized, use the CH and CH

buttons to scan through the channels. This eliminates the need to change channels by

entering the channel digits. There are three steps for memorizing channels: selecting a

broadcast source, memorizing the channels (automatic) and adding and deleting channels

(manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the

type of signal source that is connected to the TV(i.e., an antenna or a cable system).

1

Press the MENUbutton

to display the menu.

Press the

UP/DOWN buttons

to select “Channel”, then

press the ENTER

button.

2

Press the ENTER

button to cycle through

these choices:

Air, STD, HRC or IRC

(all cable TV).

Press the

UP/DOWN

buttons to select the

Video signal source,

then press the

ENTER button.

Press the EXITbutton

to exit.

Note :STD, HRC and IRC identify various types of cable

TVsystems. Contact your local cable company to identify

the type of cable system that exists in your particular area.

At this point, the signal source has been selected.

Proceed to “Storing Channels in Memory” (next page).

BN68-00858A-00Eng 2.qxd 1/9/04 10:12 AM Page 16

Contents

Main Precautions When Displaying a Still Image Astill image may cause permanent damage to the TV screen. Integrated When you connect a computer or a game console to the TV and select the 4:3 screen mode. C Chapter 1: Your New TV Chapter 2: Installation Chapter 3: Special Features Chapter 4: Operation C Chapter 5: PC Display Chapter 6: Troubleshooting Appendix List of Features List of Parts Chapter One Familiarizing Yourself with Your New TV Page Remote Control Installing Batteries in the Remote Control If remote control doesnt work Connecting VHF and UHF Antennas Chapter Two Connecting Cable TV To connect to a cable TV system, follow the instructions below. Page Connecting a PC Follow the instructions in Viewing a VCRor Camcorder Tape to view your VCR tape. Acoaxial cable is usually included with a VCR. (If not, check your local electronics store). Connecting a VCR Connecting an S-VHS VCR Connecting a DVD Player The rear panel jacks on your TVmake it easy to connect a DVD player to your TV. Changing Channels Chapter Three At any time, you can temporarily cut off the sound using the Mute button. SPECIAL FEATURES Adjusting the Volume Turning the TV On and Off Viewing the Display The display identifies the current channel and the status of certain audio-video settings. Viewing the Menus Chapter Four Plug & Play Feature You can select the Hour or Minute by pressing the number buttons on the remote control. Memorizing the Channels Page Alternate method ADD and DEL Channels (Manual Method) To select the Input Source Note: You can also press the SOURCE button on the remote to choose the Input source. To Edit the Input Source Name Name the input device connected to the input jacks to make your input source selection easier. Note: DHR = DVDHDD Receiver Using Automatic Picture Settings Customizing the Picture Note: The Tint feature does not work in component mode. Using Automatic Sound Settings Alternate method: To select the Sound option Selecting a Menu Language Setting the Blue Screen Mode Pressing the UP/DOWN buttons will alternate between On and Off. Adjusting the Color Tone You can change the color of the entire screen according to your preference. Automatic Volume Control Reduces the differences in volume level among broadcasters. Note :You can also set the time using the numeric buttons on the remote. Setting the Clock Option 2: Using the Local PBS Channel to Automatically Set the TV Clock Note: Make sure the PBS channel is in memory before using this feature. Setting the On/Off Timer Before using the timer, you must set the TVs clock. (See Setting the Clock on page 29) To deactivate the On time, select Off during this step. Setting the Sleep Timer Set the timer for the TVto turn off at the preset time automatically. Viewing Closed Captions Using the V-Chip Setting Up Your Personal ID Number (PIN) 0-0-0-0. How to Enable/Disable the V-Chip How to Set up Restrictions Using the TV guidelines Page How to Set up Restrictions Using the MPAARatings: G, PG, PG-13, R, NC-17, X Page How to Set up Restrictions Using Canadian English How to Set up Restrictions Using Canadian French Chapter Five Using Your TV as a Computer (PC) Display Page Changing the Screen Position To Initialize the Screen Position or Color Settings How to Auto Adjust Using Automatic Picture Settings Customizing the Picture Adjusting the Color Tone You can change the color of the entire screen according to your preference. Customizing the Color Preset to PCmode by pressing the SOURCE button on the remote contro Chapter Six T Identifying Problems T Using the Anti-Theft Kensington Lock 1. 2. 3. Retractable Stand Installing VESA compliant mounting devices <1> <2> Wall Mount Instructions Mounting pad Installing the Wall Mount Kit 3 2 Please use provided components or parts to install the Wall Mount Kit. 1 Installing the Wall Mount Kit (LT-P1545/LT-P1745/LT-P1745U) How to adjust an angle 4 5 Installing the Wall Mount Kit 3 2 Please use provided components or parts to install the Wall Mount Kit. 1 Installing the Wall Mount Kit How to adjust an angle 4 5 6 Using Your TV in Another Country Display Mode Specifications LT-P1745/LT-P1745U LT-P1545 LT-P2045 LT-P2045U