Chapter Four
OP E R AT I O N
Plug & Play Feature
When the TV is initially powered On, two basic customer settings proceed automatically and subsequently: Setting Auto program, Clock.
1
Press the POWER button on the remote control.
The message “Plug &
Play” is displayed.
2
Press the
UP/DOWN
buttons to select “English”, “Français”, “Español”, or “Português” then press the ENTER 
button. Press the UP/DOWN 
buttons to select “Air”,“STD”, “HRC” or “IRC”, then press the ENTER 
button.
3
Press the ENTER 
Button. The TV will begin memorizing all of the available channels.
Press the ENTER 
button to stop.
Press the MENU(Clock ) button on the remote control to display a
window where you can configure the time settings.
4
Press the
LEFT/RIGHT 
buttons to move to the hour or minute.
Set the Hour or Minute by pressing the UP/DOWN
buttons. (refer to “Setting the Clock” on page 29).
5
The message
“Enjoy your watching.” is displayed.
You can select the Hour or Minute by pressing the number buttons on the
remote control.
