English-17
OPERATION
3
Press the ENTER
button.
The TV will begin
memorizing all of the
available channels.
The TVautomatically cycles
through all of the available
channels and stores them in
memory. This takes about one to
two minutes.
Press ENTER at any time to
interrupt the memorization process
and return to the CHANNELmenu.
2
Press the
UP/DOWN buttons
to select “Auto Program”.
Press the ENTER
button.
1
First, select the correct
signal source (Air, STD,
HRC, IRC). See steps
1~2 on previous page.
Press the MENUbutton.
Press the
UP/DOWN buttons
to select “Channel”, then
press the ENTER
button.
4
After all the available
channels are stored,
the Auto Program menu
reappears.
Press the EXITbutton
to exit.
Ex) Press to select channel 108.
Press theCH /button.
Only the channels stored in memory are selected.
Storing Channels in Memory (Automatic Method)
To check the channels stored in memory
To select channels over 100
Note: You can also press the
AUTO PROG. button to select
available channels.
BN68-00858A-00Eng 2.qxd 1/9/04 10:12 AM Page 17