Congratulations on your purchase of the Orion SkyView Pro GoTo system. The GoTo system will add brains to your SkyView Pro equatorial mount’s brawn. Once the GoTo system has been installed, it enables you to locate and automati- cally slew to thousands of celestial objects using the included hand controller. Views of the planets, Moon, galaxies, nebulae, stars, and star clusters will all be as close as the touch of a button. You’ll find using your SkyView Pro GoTo mount will provide an entirely new astronomical experience that will open up new realms of celestial exploration.
These instructions will help you install and properly use the SkyView Pro GoTo system. Please read them over thoroughly before getting started. It may take a few observing sessions to become familiar with all the features of the SkyView Pro GoTo mount, so keep this manual handy as you master your mount’s operation.
1. Parts List
Qty. Description
1 Declination (Dec.) GoTo motor assembly
1Right ascension (R.A.) GoTo motor assembly
2Brass gears w/ 2mm
1Motor control box
1Motor control box bracket
1GoTo hand controller
1GoTo hand controller cable (coiled, 30")
1GoTo hand controller bracket
1 | Motor Cable (13"): motor control |
1Motor Cable (27"): R.A.
1Hand
112V DC power cable
1Declination (Dec.) motor cover
1Right ascension (R.A.) motor cover
1Right ascension (R.A.) motor attachment screw (40mm length)
1Declination (Dec.) motor attachment screw (17mm length)
1Phillips screw (10mm length)
2Phillips screws (8mm length)
2flat washers, 10mm outer diameter
1lock washer, 9mm outer diameter
14mm hex key
12mm hex key
1Phillips screwdriver
2. Installation
Attaching the R.A. GoTo Motor
Remove the telescope tube, counterweight, and counter- weight shaft from the SkyView Pro mount before attaching the motor drives.
1.Remove the R.A. motor cover from the mount by loosening the Phillips head screw on the bottom of the cover (Figure 2). Slide the cover off the mount.
R.A. motor cover
Figure 2. The R.A. motor cover |
|
Smaller gear | |
|
Attachment hole
R.A. GoTo motor attachment screw
Figure 3. The R.A. GoTo motor assembly
3