Onkyo HT-S6100 instruction manual Error Messages

First Time Setup—Continued

6	When the measurements are
	complete, the following screen
	appears.
		Auto Speaker Setup
			AUDYSSEY
		Calculating...

7	When the calculations are com-
	plete, the following screen
	appears.
		Auto Speaker Setup
					AUDYSSEY
		Review Speaker configuration
		Subwoofer	:	No
		Front	:	40Hz
		Center	:	40Hz
		Surround	:	40Hz
		Surr Back	:	40Hz
		Surr Back Ch	:	1ch
		Save
		Cancel

Use the Up and Down []/[ ] buttons to select an option, and then press [ENTER].

The options are:

Save:

Save the calculated settings and exit the automatic speaker setup.

Cancel:

Cancel the automatic speaker setup.

Note:

•You can view the calculated settings for the speaker configuration, speaker distances, and speaker levels

by using the Left and Right []/[ ] buttons.

8	Disconnect the speaker setup
	microphone.
		Auto Speaker Setup
			AUDYSSEY
		Please unplug microphone.

Note:

•When the automatic speaker setup is complete, the Equalizer Settings (page 78) will be set to “Audyssey.”

Error Messages

While the automatic speaker setup is in progress, one of the following error messages may appear:

❏Ambient noise is too high

Auto Speaker Setup AUDYSSEY

Ambient noise is too high.

Retry

Cancel

This message appears if the background noise is too loud and the measurements cannot be performed properly.

Remove the source of the noise and try again. Retry: Return to the measured point immediately

before and start set up again. Cancel: Cancel the automatic speaker setup.

❏Speaker Detect Errors

		Auto Speaker Setup
						AUDYSSEY
- - - - - Speaker Detect Error - - - - -
FL	: Yes		FR	: No
SL	:	---	SR	:	---
SBL	:	---	SBR	:	---
C	: Yes		SW	:	---
Retry
Cancel

One of the front speakers has not been detected.

		Auto Speaker Setup
						AUDYSSEY
- - - - - Speaker Detect Error - - - - -
FL	: Yes		FR	: Yes
SL	:	---	SR	:	No
SBL	:	---	SBR	:	---
C	: Yes		SW	:	---
Retry
Cancel

One of the surround speakers has not been detected.

	Auto Speaker Setup
					AUDYSSEY
- - - - - Speaker Detect Error - - - - -
FL	: Yes	FR	: Yes
SL	: ---	SR	:	No
SBL	: ---	SBR	:	Yes
C	: Yes	SW	:	---
Retry
Cancel

The surround back speakers have been detected but the surround speakers haven’t.

44