Onkyo HT-S6100 instruction manual Lock Setup, Advanced Setup-Continued, Setup closes

Advanced Setup—Continued

Notes:

•RIHD, which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is part of the HDMI standard. CEC provides interoperability between various components, however, operation with components other than RIHD-compatible components and recommended components cannot be guaranteed.

•Select Disable if a connected component is incompat- ible or you’re not sure about its compatibility.

•If operation is unreliable when set to Enable, select Disable instead.

Power Control

To link the power functions of RIHD-compatible com- ponents connected via HDMI, select Enable.

Disable: Power Control disabled.

Enable: Power Control enabled.

Notes:

•The Power Control setting can be set only when the above Control setting is set to Enable.

•HDMI power control only works with RIHD-compat- ible components that support it and may not work properly with some components due to their settings or compatibility.

•When set to Enable, the AV receiver consumes more power.

•When set to Enable, the AV receiver enters Ready mode when set to Standby, and the STANDBY indica- tor lights up.

•When set to Enable, regardless of whether the AV receiver is On or on Standby, both audio and video received by an HDMI input will be output by the HDMI OUT for playback on the TV or other compo- nent that’s connected to the HDMI OUT.

TV Control

Select Enable to control the AV receiver from an RIHD- compatible TV connected via HDMI.

Disable: TV Control disabled.

Enable: TV Control enabled.

Notes:

•Select Disable if your TV is incompatible or you’re not sure about its compatibility.

•The TV Control setting can be set only when the above Control and Power Control settings are both set to Enable.

•When the Audio TV Out setting is set to On, or TV Control is set to Enable and you’re listening through your TV’s speakers (see page 36), if you turn up the AV receiver’s volume control, the sound will be output by the AV receiver’s speakers. To stop the AV

receiver’s speakers producing sound, change the set- tings, change your TV’s settings, or turn down the AV receiver’s volume.

Note:

•After changing the Control, Power Control, or TV Control setting, be sure to turn all of your compo- nents off and then back on again. Refer to the instruction manuals for your other components.

Lock Setup

With this setting, you can protect your settings by lock- ing the setup menus.

1	Press the [RECEIVER] button,
	followed by the [SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2	Use the Up and Down [ ]/[ ]
	buttons to select “8. Lock Setup,”

and then press [ENTER].

3	Use the Left and Right [ ]/[ ]
	buttons to select:

Locked: Setup menus locked.

Unlocked: Setup menus unlocked.

When Locked is selected, only this

Lock Setup item can be accessed.

4	Press the [SETUP] button.
	Setup closes.

83