Onkyo HT-S6100 Turn up the volume so that you, Can hear the test tone suffi, Ciently

Advanced Setup—Continued

8	Press the [SETUP] button.
	Setup closes.

Notes:

•The Center and Subwoofer distances can be set up to 5 ft. (1.5 m) more or less than the Left distance. For example, if the Left distance is set to 20 ft. (6 m), the Center and Subwoofer distances can be set between 15 and 25 ft. (4.5 and 7.5 m).

•The Surround and Surround Back distances can be set up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the Left distance. For example, if the Left distance is set to 20 ft. (6 m), the SurrRight, Surr Left, Surr Back R, and Surr Back L distances can be set between 5 and 25 ft. (1.5 and 7.5 m).

•The speaker distance cannot be adjusted while a pair of headphones is connected or the multichannel DVD input is being used.

Speaker Levels

These settings are set automatically by the Automatic Speaker Setup function (see page 42).

You can set the volume level of each speaker so that all speakers can be heard equally at the listening position.

1	Press the [RECEIVER] REMOTE
	MODE button, followed by the
	[SETUP] button.

2 Use the Up and Down []/[ ] buttons to select “2. Speaker Setup,” and then press the [ENTER] button.

3	Use the Up and Down [ ]/[ ]
	buttons to select “3. Level Cali-

bration,” and then press [ENTER].

A pink noise test tone is output by the front left speaker.

4	Turn up the volume so that you
	can hear the test tone suffi-
	ciently.
	As each speaker outputs the test tone,
	its name appears on the display.
5	Use the Left and Right [	]/[ ]
	buttons to adjust the speaker
	level, and use the Down [	] but-
	ton to select the next speaker.

The levels can be adjusted from –12 to +12 dB in 1 dB steps (–15 to +12 dB for the subwoofer).

6	Repeat step 5 so that the level of
	the test tone coming from each
	speaker is the same.
	Speakers that you set to No or None in
	the Speaker Configuration (page 74) do
	not output the test tone.
7	Press the [SETUP] button.
	Setup closes.
	Don’t forget to turn down the volume if
	you turned it up while setting the levels.

Note:

•The speaker levels cannot be adjusted while a pair of headphones is connected or the AV receiver is muted.

•While speaker set B is on, you can adjust the volume of the left and right speakers, from –12 dB to +12 dB.

•While speaker set B is on, you cannot adjust the levels of speaker set A’s surround back speakers.

77