Onkyo HT-S6100 instruction manual Speaker Package, Subwoofer SKW-750X

Speaker Package

Subwoofer (SKW-750X)

For detailed information, see the pages in parentheses.
■ Front	A STANDBY/ON indicator
	Red:	Subwoofer in standby mode
	Blue:	Subwoofer on

With the Auto Standby function, the SKW-750X automatically turns on when an input signal is detected in Standby mode. When there’s no input signal for a while, the SKW-750X automatically enters Standby mode.

B OUTPUT LEVEL control (50)

1

This control is used to adjust the volume of the sub- woofer.

■Rear

X

2 3

To AC outlet

CLINE INPUT (22)

This RCA input should be connected to the sub- woofer pre out on your AV receiver, amp, or other receiver with supplied RCA cable.

Note:

The Auto Standby function turns the subwoofer on when the input signal exceeds a certain level. If the Auto Standby function does not work reliably, try slightly increasing or decreasing the subwoofer output level on the AV receiver (page 81).

Front, Center, Surround, and Surround back speakers (SKF-750XF,SKC-750XC, SKM-750XS, SKB-750X)

■Rear

SKF-750XF/SKM-750XS/SKC-750XC/SKB-750X

1Keyhole slots

These keyhole slots can be used to wall-mount the speaker. See page 23 for mounting instructions.

2Speaker terminals

1

	These push terminals are for connecting the speaker
	to your AV Receiver, amp, or other receiver with the
	supplied speaker cables. The supplied speaker
	cables are color-coded for easy identification. Sim-
	ply connect each cable to the same-colored positive
	speaker terminal.
3	3 Speaker mount/bracket inserts
2	These threaded inserts can be used to attach the
	speaker either horizontally or vertically to a speaker
	mount or bracket.
	Note:
	Use commercially available 1/4" screws to attach
	the speaker to a speaker mount or bracket.

16