Onkyo HT-S6100 Source Setup, IntelliVolume, Advanced Setup-Continued, A/V Sync, explained below

Advanced Setup—Continued

Source Setup

This section explains items on the Source Setup menu. Items can be set individually for each input selector.

1	Press the input selector buttons
	to select an input source, and
	then press the [RECEIVER]
	REMOTE MODE button.

2	Press the [SETUP] button.
	The main menu appears onscreen.
	If the main menu doesn’t appear, make
	sure the appropriate external input is
	selected on your TV.
3	Use the Up and Down [ ]/[ ]
	buttons to select “4. Source
	Setup,” and then press [ENTER].

4	Use the Up and Down [ ]/[ ]
	buttons to select an item, and
	then press [ENTER].

5	Use the Left and Right [ ]/[ ]
	buttons to change it.
	The Source Setup menu items are
	explained below.

6	When you’ve finished, press the
	[SETUP] button.
	Setup closes.

IntelliVolume

With IntelliVolume, you can set the input level for each input selector individually. This is useful if one of your source components is louder or quieter than the others.

Use the Left and Right []/[ ] buttons to set the level.

If a component is noticeably louder than the others, use the Left [] button to reduce its input level. If it’s noticeably quieter, use the Right [ ] button to increase its input level. The input level can be adjusted from –12 dB to +12 dB in 1 dB steps.

A/V Sync

When using your DVD player’s progressive scanning function, you may find that the picture and sound are out of sync. With the A/V Sync setting, you can correct this by applying a delay to the audio signal. The delay can be set from 0 to 100 milliseconds (msec) in 10 millisecond steps.

Use the Left and Right []/[ ] buttons to set the delay.

To view the TV picture while setting the delay, press [ENTER].

If HDMI Lip Sync is enabled (see page 82), and your TV or display supports HDMI Lip Sync, the displayed delay time will be the A/V Sync delay time. The HDMI Lip Sync delay time is displayed underneath in parentheses.

Note:

•A/V Sync is disabled when the Direct listening mode is used with an analog input source.

79