Tripp Lite Alternative Power Source owner manual Symptom Problems Corrections

Page 15

Troubleshooting

Try these remedies for common APS problems before calling for help. Call Tripp Lite Customer Service at (773) 869-1234 before returning your APS for service.

SYMPTOM

PROBLEMS

CORRECTIONS

APS does not provide

APS not properly connected to

Connect APS to utility power.

AC output (AC input present)

utility power.

 

 

 

 

 

Circuit breaker is tripped.

Reset circuit breaker.

 

 

 

 

APS shutdown due to excessive

Turn APS “OFF”. Wait 1 minute and

 

battery voltage, indicating possible

switch to “AUTO/REMOTE”.

 

charger failure. Line disconnected

 

 

to prevent permanent battery

 

 

damage.

 

 

 

 

 

APS is set to “OFF”

Set APS to “AUTO/REMOTE” or

 

 

“CHARGE-ONLY”.

 

 

 

APS does not provide

Circuit breaker is tripped.

Reset circuit breaker.

AC output (AC input absent)

 

 

 

 

 

 

Operating Mode Switch is set

Set Operating Mode Switch to “AUTO/

 

to “CHARGE ONLY”.

REMOTE.”

 

 

 

 

Load or High Temperature fault.

Turn APS “OFF”. Wait 1 minute.

 

 

Remove overload. Switch to

 

 

“AUTO/REMOTE”.

 

 

 

 

Excessive battery discharge.

Check battery condition.

 

 

 

APS will not charge the

Connected batteries are dead.

Check and replace old batteries.

battery (AC input present)

 

 

 

 

 

 

Battery fuse* is blown.

Check and replace fuse.

 

Battery cabling* is loose or degraded.

Check and tighten or replace cabling.

 

 

 

 

APS charger failure.

Turn APS “OFF”. Wait 1 minute and

 

 

switch to “AUTO/REMOTE”. If

 

 

automatic shutdown occurs, call

 

 

Tripp Lite Customer Service.

 

 

 

All APS Indicator Lights are

This is normal if the APS is set

—

OFF (AC input absent)

to “CHARGE-ONLY”

 

 

 

 

All APS Indicator Lights are

Excessive battery discharge.

Use an auxiliary charger* to raise

OFF (AC input is present or

 

battery voltage. Check external battery

absent)

 

connections and fuse. Automatically

 

 

resets when condition is cleared.

 

 

 

All APS Battery Indicator

Excessive battery discharge.

Use an auxiliary charger* to raise

Lights are slowly flashing.

 

battery voltage. Automatically resets

 

 

when condition is cleared.

 

 

 

APS “LOAD” Battery Light

Inverter shutdown because battery

Reset by cycling control switch to

flashing

voltage dropped too low for more

“OFF” position then to “AUTO/

 

than 5 seconds. Protects battery

REMOTE”.

 

from permanent damage.

 

 

 

 

All APS Battery Lights are

High battery voltage shutdown

Check all charging sources. Reset by

rapidly flashing

during Charge mode.

cycling control switch to "OFF" then to

 

 

“AUTO/REMOTE” or “CHARGE-ONLY”.

 

 

 

APS “LOAD” Indicator Light

Inverter overload caused by

Reset by reducing load and cycling

is rapidly flashing

excessive load or short circuit.

control switch to “OFF” position then

 

If sustained for more then 5

to “AUTO/REMOTE”.

 

seconds the Inverter is shutdown.

 

*User supplied

 

 

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents APS PowerVerter High Efficiency Output IntroductionStage Battery Charger APS Location Warnings Important Safety InstructionConfiguration Dip Switch Settings ConfigurationLoad SHARING/EQUALIZE Battery Charge Battery Charger Limiting PointsSetting Procedure Equalize Battery Charge DIP Switch #3, Group BBattery Selection Selecting Battery TypeSelecting Battery Amp Hour Capacity DC Ground Connection Battery ConnectionStandard DC VehicularAC Connection AC Input Electrical Connection All corded modelsAC Output Electrical Connection All corded models Switches, Indicator Lights & Other Features Set Operating Mode SwitchSwitches Indicator Capacity Indicator LightsOther Features Service Maintenance & ServiceLimited Warranty MaintenanceSymptom Problems Corrections Inverter Specifications Corded ModelsSpecifications Hardwired Models Manual de Operación Introducción Introducción continua Precauciones de Operación Precauciones Sobre la Ubicación del APSPrecauciones Sobre la Conexión de Baterías Precauciones Sobre la Conexión de EquiposSeleccione el Punto Alto de Voltaje de CA ConfiguraciónConfiguración continua Grupo B DE Interruptores DIP Modelos SelectosPuntos Limites del Cargador de Baterias Carga de Baterías Posición del Interruptor Procedimiento de RegulacionSelección de Baterías Seleccione la Capacidad en Amperios/Hora de las BateríasSeleccione el Tipo de Baterías Estándar Conexión de BateríasConexión de Baterías continua Conexión de Baterías DC VehículosConexión de CD a Tierra Conexión de CA Interruptores Regule el Interruptor Operating Mode Modo de OperaciónConexión de CA continua Interruptores, Luces Indicadoras y Otras CaracterísticasLuz Indicadora Capacidad Luces IndicadorasOtras Características Servicio en México Garantía LimitadaMantenimiento ServicioSimtoma Problemas Solucion Resolucion de ProblemasEspecificaciones Modelos con cable Especificaciones Modelos con toma directa al circuito See Hardwire Electrical Connections, pg Diagrams/EsquemasVolts Basic 12VDC Vehicular Battery Connection. See Pg Corded Model Modelo con Cable Hardwired Model Modelo con Toma Directa al Circuito

Alternative Power Source specifications

Tripp Lite, a leader in power protection, offers a range of alternative power sources designed to meet the diverse needs of users in both residential and commercial settings. Their innovative solutions focus on reliability, performance, and versatility, making Tripp Lite a trusted name for those seeking uninterrupted power supply.

One of the standout products in their lineup is the Tripp Lite UPS (Uninterruptible Power Supply) system, which ensures that critical equipment remains powered during outages. These UPS units typically feature advanced technologies such as Automatic Voltage Regulation (AVR), which corrects minor power fluctuations without switching to battery. This feature helps extend battery life and ensure equipment receives a stable power supply.

Tripp Lite’s UPS models come equipped with a variety of output options, including multiple outlets for connecting devices. Many units also feature USB ports for charging mobile devices or connecting to computers for power management through Tripp Lite’s PowerAlert software. This software provides real-time monitoring and alerts, allowing users to track battery performance and receive notifications about power events.

In addition to UPS systems, Tripp Lite offers portable power stations as alternative energy solutions. These stations are particularly useful for outdoor enthusiasts, contractors, or anyone needing temporary power away from the grid. With features such as pure sine wave output, users can run sensitive electronics without the risk of damage. The battery technology used in these power stations often includes lithium-ion for lightweight portability and enhanced efficiency, ensuring a reliable power supply on the go.

Tripp Lite’s commitment to safety is evident in their products, which include built-in surge protection to guard devices against voltage spikes and electrical surges. Many models are designed with a user-friendly interface, featuring clear display screens that show battery status, load levels, and remaining runtime, making it easy for users to monitor their power situation.

Furthermore, Tripp Lite understands the importance of sustainability. They strive to design their products with energy efficiency in mind, often adhering to stringent environmental standards during production and operation.

In conclusion, Tripp Lite’s alternative power sources embody the features and technologies that businesses and consumers require for reliable power. With innovations like AVR, versatile output options, and user-friendly monitoring systems, Tripp Lite ensures that users can trust their products to provide lasting power solutions in any environment. Whether for home use, office settings, or outdoor adventures, Tripp Lite continues to pave the way in power protection and management.
Top Page Image Contents