Optional 2POSTRMKITHD supports installation in 2 post 19 inch racks (4 required)
Optional
Supports Emergency Power Off (EPO) via
Front panel LEDs and LCD readout with scroll controls
LED / LCD display panel rotates for viewing in rackmount or tower configurations
External battery packs are field replaceable and hot swappable
Frequency conversion mode enables conversion of 60Hz to 50Hz or 50Hz to 60Hz (no
Specifications
OUTPUT
Output Volt Amp Capacity (VA)
Output kVA capacity (kVA)
Output Watt Capacity (watts)
Output kW capacity
Output power factor
Output Capacity Details
Nominal Output Voltage(s) Supported
Nominal Voltage details
Frequency compatibility
Frequency compatibility details
Output voltage regulation (line mode)
20000
20
18000
18
0.9
Supports up to 105% load continuously in double conversion mode, 106 to 125% for 1 minute, 126% to 150% for 30 seconds; Loads over 150% trigger immediate bypass mode operation to support loads directly from mains power; Double conversion mode is automatically restored as load levels are reduced to 95% or less
200V; 208V; 220V; 230V; 240V
Voltage selection via front panel LCD interface
50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion
Output frequency matches input nominal on startup; Frequency conversion mode enables conversion of 60Hz to 50Hz or 50Hz to 60Hz (no
+/- 2%
Output voltage regulation (Economy line mode)
+/- 10%
Output voltage regulation (Battery mode)
+/- 2%
Output AC waveform (AC mode)
Output AC waveform (battery mode)
INPUT
Hardwire
Sine wave
Pure Sine wave
Rated input current (at maximum load)
Nominal Input Voltage(s) Supported
112.2A (200V), 108A (208V), 102A (220V), 97.6A (230V), 93.6A (240V)
200V AC; 208V AC; 220V AC; 230V AC; 240V AC