Recommended | 120V 20A dedicated circuit |
Electrical Service |
|
|
|
BATTERY |
|
Full load runtime | 4.5 minutes with internal batteries (1600w) |
|
|
Half load runtime | 14 minutes with internal batteries (800w) |
|
|
Expandable | Supports extended runtime with optional external battery pack |
battery runtime |
|
|
|
DC system voltage | 48VDC |
|
|
Typical battery | |
lifespan |
|
|
|
Battery recharge | Less than 5 hours to 90% |
rate |
|
|
|
Replacement |
|
Battery Cartridge |
|
|
|
VOLTAGE REGULATION
Voltage regulation description
Overvoltage correction
Brownout correction
Maintains output of selected nominal
Maintains output of selected nominal
LEDS ALARMS & SWITCHES
Front panel LEDs
Alarms
LED STATUS DISPLAY: line power (green), online (green), bypass (yellow), on battery (green), overload (red), battery low (yellow) - 4 LED LOAD / BATTERY LEVEL DISPLAY (100%, 75%, 50%, 25%).
Switches
Includes power off/on switch to enable system turn on (press ON switch), UPS battery test (press ON switch during normal AC operation), buzzer silence (press ON switch during battery operation) and OFF (press OFF switch) - all switch functions require that the switch be pressed and held for longer than 2 seconds, but less than 4 seconds
SURGE / NOISE SUPPRESSION
AC surge | 570 joules |
suppression |
|
|
|
AC suppression | Instantaneous |
response time |
|
|
|
Dataline | Set of 8 wire RJ style interface jacks offer surge suppression for network ethernet or TEL/DSL connection. Pins 1,2,3 and |
suppression | 6 offer ethernet protection starting at 7.5V and the center two wires, pins 4 & 5, offer TEL/DSL line suppression starting at |
| 260V |
|
|
EMI / RFI AC noise | Yes |
suppression |
|
|
|
PHYSICAL |
|
Shipping weight | 58.6 |
(lbs) |
|
|
|
Shipping weight | 26.6 |
(kg) |
|
|
|
Shipping | 15.25 X 13 X 24 |
Dimensions |
|
(HWD/in) |
|
|
|
Shipping Dimensions (HWD/cm)
38.7 X 33 X 61
Unit weight (lbs)
53.4
Unit weight (kg)
24.2