Output AC waveform (battery mode)
INPUT
Pure Sine wave
Rated input current (at maximum load)
Nominal Input Voltage(s) Supported
UPS input connection type
UPS input connection description
Input circuit breaker
BATTERY
6.52A
230V AC
C14 inlet
10A
Full load runtime (minutes)
Half load runtime (minutes)
Expandable battery runtime
External battery pack compatibility
DC system voltage (VDC)
Battery recharge rate (included batteries)
Replacement battery cartridge (internal UPS battery replacement)
7 min. (1000w)
18 min. (500w)
Extended runtime supported via optional external battery packs
36
Less than 4.5 hours from 10% to 90%
Battery Access
Battery replacement description
VOLTAGE REGULATION
Front panel battery access door
Voltage regulation description
Overvoltage correction
Undervoltage correction
Severe undervoltage correction
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151 to 282
Input voltages between 245 and 282 are reduced by 12%
Input voltages between 181 and 199 are boosted by 12%
Input voltages between 151 and 180 are boosted by 24%
LEDS ALARMS & SWITCHES
LED Indicators
Alarms
Alarm cancel operation
Switches
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Audible alarm indicates
2 Switches control off/on power status and
SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating
480