Tripp Lite RV2012OEM Input, Battery, Leds Alarms & Switches, Surge / Noise Suppression, Physical

Continuous output	2000
capacity (watts)
Peak output	4000
capacity (watts)
INPUT
Input connection	DC INPUT: Set of 4 DC bolt-down terminals (2 red / 2 black). AC INPUT: hardwire (2 input circuits - see manual)
type
Input cord length	DC INPUT: User supplies cabling. 0 gauge or larger (see manual). AC INPUT: hardwire
Recommended	DC INPUT: Requires 12VDC input source capable of delivering 185A for the required duration (when used at full
Electrical Service	continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). For automotive
	applications, professional hardwire
Maximum input	DC INPUT: Full continuous load - 190A at 12VDC. AC INPUT: 60 amps total (40A line 1 / 20A line 2) at 120VAC with full
amps / watts	inverter and charger load (25A max charger-only from line 1 / combined input load to support charger and AC output is
	automatically controlled
BATTERY

Expandable battery runtime

DC system voltage

Battery recharge rate

Runtime is expandable with any number of user supplied wet or gel type batteries

12V

25A /100A (selectable)

LEDS ALARMS & SWITCHES

Front panel LEDs

Switches

Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.

3-position on/off/remote switch enables simple on/off power control plus auto/remote setting that enables distant on/off control of the inverter system when used in conjunction with APSRM4 accessory (sold separately) in inverter mode. In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to battery power, maintaining continuous AC power to connected loads.

SURGE / NOISE SUPPRESSION

AC surge	450 joules AC surge suppression included
suppression
PHYSICAL
Shipping weight	58.8
(lbs)
Shipping weight	26.7
(kg)
Shipping	15.25 x 16 x 24
Dimensions
(HWD/in)

Shipping Dimensions (HWD/cm)

38.7 x 40.6 x 60.9

Unit weight (lbs)

Unit weight (kg)

Unit Dimensions (HWD/in)

Unit Dimensions (HWD/cm)

Material of construction

Form factors supported

Cooling method

Style

ENVIRONMENTAL

53

24.1

9.75x 11.25 x 16.5

24.8x 28.6 x 41.9

Steel

Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)

Multi-speed fan

Heavy-duty with built-in battery charger