Storage and Service, Specifications

Storage and Service

Storage

Before storing your UPS, place it in the OFF mode by reversing the Connection procedure: use the POWER button to place the UPS in STANDBY mode; unplug the UPS; set the double-pole input breaker to the "OFF" position; disconnect the external battery pack. If you store your UPS for an extended period of time, recharge the UPS batteries once every three months by following Steps 1, 2 and 3 in the Connection section and allowing the UPS to charge its batteries for 4-6 hours before placing it back in storage. If you leave your UPS batteries discharged for an extended period of time, they will suffer a permanent loss of capacity.

Service

If returning your UPS for service, contact your local Tripp Lite dealer or distributor. They will refer you to a service center. Please carefully pack the UPS using the ORIGINAL PACKING MATERIAL that came with the unit. Enclose a letter describing the symptoms of the problem. If the UPS is within the 2 year warranty period, enclose a copy of your sales receipt.

Specifications

	SMART5000RT3U	SMART5000RT3U
	with 30A plug*	with 50A plug*
Series # (Power Module):	AGSM5000Y3U31	AGSM5000Y3U31
Series # (Battery Pack):	AGBP4860Y3U	AGBP4860Y3U
Output Capacity (VA/Watts):	4475(@208+120V)/4000	5000(@208V), 4800(@120V)/4000
Battery Runtime in Minutes (Half Load/Full Load):	38+/16+**	38+/16+**
Battery Recharge Time:	2-4 hrs.**	2-4 hrs.**
Approvals:	UL, cUL, NOM	UL, cUL, NOM

*The SMART5000RT3U features a 30A plug. A trained technician may replace it with an user-supplied 50A plug.

**Battery Runtime listed assumes connection to a single BP48V60RT3U external battery pack. Battery Runtime can be increased with additional external battery packs. Adding external battery packs will also increase recharge time.

Input Voltage (208V); Input Frequency (60 Hz); Online Input Voltage Range (151-260 volts); Voltage-Regulated Output Voltage Range (208/120V ±9%); On-Battery Output Voltage Range (208/120V ± 5%); Output Waveform Line Mode (filtered sinewave); Output Waveform Battery Mode (sine wave); AC Surge Suppression (exceeds IEEE 587 Cat. A & B standards); AC Noise Attenuation (>40 dB); AC Surge Protection Modes (H to N, H to G, N to G); Compatible Battery Packs (BP48V60RT3U).

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

Note on Labeling

Two symbols are used on the label.

V~ : AC Voltage

V : DC Voltage

3U specifications

Tripp Lite 3U is a versatile and robust rack mount solution designed to meet the diverse needs of modern data centers and IT environments. Known for its high-quality construction and reliable performance, this 3U rack mount unit is ideal for housing critical equipment, such as servers, switches, and routers.

One of the standout features of the Tripp Lite 3U is its solid steel construction, which provides durability while maintaining a lightweight profile. This ensures that the unit can withstand the rigors of daily use in demanding environments without compromising the safety of the equipment it houses. Additionally, the sleek design allows for efficient cooling, ensuring that airflow is optimized for the internal components.

The Tripp Lite 3U also boasts convenient accessibility, featuring front and rear mounting options that allow for easy installation and maintenance. This ensures that IT professionals can quickly access servers and networking equipment for upgrades, repairs, or troubleshooting without requiring extensive downtime.

In terms of technology, the Tripp Lite 3U supports various mounting configurations, accommodating various types of equipment, including both standard and oversized devices. This flexibility makes it an excellent choice for organizations looking to standardize their rack solutions while still accommodating specialized hardware.

Another significant characteristic of the Tripp Lite 3U is its compatibility with various standard rack accessories, including shelves, drawers, and cable management systems. This adaptability allows users to create a customized and organized setup that enhances both workflow efficiency and equipment safety.

Furthermore, the Tripp Lite 3U emphasizes safety and compliance, with features such as a locking mechanism that secures sensitive equipment against unauthorized access. This is especially significant in environments where data security is paramount.

In conclusion, the Tripp Lite 3U is a reliable, flexible, and durable rack mount solution. Its robust construction, efficient cooling design, convenient accessibility, and compatibility with a range of accessories make it an ideal choice for any data center or IT infrastructure. Whether housing servers, network equipment, or specialized devices, the Tripp Lite 3U delivers the performance and reliability that today's businesses demand. With its focus on safety and compliance, it is an invaluable addition to any professional setup, ensuring that critical systems remain protected and operational in all conditions.