Tripp Lite 3U owner manual Basic Operation, Buttons Front Panel

Page 6

Basic Operation

Buttons (Front Panel)

Use the POWER button to switch your UPS between its four modes of operation.

OFF: No indicator lights are on. The UPS is completely shut down for storage or shipping. If the UPS is connected to AC power, it will start up in STANDBY mode. If the UPS is not connected to AC power and the POWER button is pressed for two seconds, the UPS will “cold start” into INVERT mode.

STANDBY: The “ ” light is flashing. The UPS is receiving AC power and using it to charge its batteries, but its outlets are not active. Pressing the POWER button while the UPS is in STANDBY will put the UPS in the ON mode. Unplugging the UPS or cutting AC power while the UPS is in STANDBY will put the UPS in the OFF mode.

ON: The “ ” light is on. The UPS is receiving AC power, charging its batteries and delivering power to connected equipment. If AC power is lost while the UPS is ON (i.e. a blackout occurs), the UPS will switch into INVERT mode. Pressing the POWER button while the UPS is ON will put the UPS in STANDBY mode.

INVERT: The “ ” light is flashing. The UPS is powering connected equipment from battery backup. If AC power is restored, the UPS will switch to the ON mode. Pressing the POWER button while the UPS is in INVERT will put the UPS into the OFF mode. If the UPS is in INVERT and its batteries are drained, the UPS will switch to the OFF mode until AC power is restored, then switch to the ON mode.

Use the MUTE/TEST button to do two things:

SILENCE ALARM: Your UPS has three alarms. The first, the INVERT alarm, emits four short beeps every ten seconds when the UPS is in INVERT mode, to warn you that AC power has failed. The second, the OVERLOAD alarm, emits short, rapid beeps when the UPS is in INVERT mode if the total power draw of connected equipment exceeds the UPS’s output capacity, to warn you to reduce the load. The third, the Low Battery alarm, emits a constant beep when the UPS is in INVERT mode and its batteries are very nearly depleted, to warn you that connected equipment must shut down. To silence the INVERT or OVERLOAD alarms, press the MUTE/TEST button. The LOW BATTERY alarm will only stop when the UPS switches to the OFF or ON mode.

SELF-TEST:If your UPS is in the ON mode and has a load connected, you may test its batteries by pressing the MUTE/TEST button for two seconds. The UPS will switch to INVERT mode for several seconds. Normally, the INVERT alarm (four short beeps) will sound, indicating that the system is working properly. If the OVERLOAD alarm (short, rapid beeps) sounds, reduce the load on the UPS. If the LOW BATTERY alarm (a constant beep) sounds, your UPS’s batteries may need replacing, your external battery connection may be loose or the batteries may simply be less than fully charged. Check the external battery connection, let the UPS charge for 12 hours, then perform a second self-test. If the LOW BATTERY alarm sounds again, contact Tripp Lite for service. Do not unplug your UPS to test its batteries, or you will remove safe electrical grounding and may introduce a damaging surge into your network connections.

6

Image 6
Contents SmartPro 3U Rackmount 5000VA UPS Location Warnings Important Safety InstructionsBattery Warnings UPS Connection WarningsSuggested Rackmount Installation for 4-Post Enclosures MountingColor Selection Connection Plug your equipment into your UPSTurn your UPS on USB Port Connection Connection OptionalDB9 Port Connection EPO Port ConnectionBasic Operation Buttons Front PanelIndicator Lights Front Panel AC Receptacles Other UPS Features Rear PanelEPO Emergency Power Off Port Smart DB9 PortsPower Sensitivity Adjustment Accessory SlotExternal Battery Connector Input BreakersService Storage and ServiceSpecifications StorageManual de Operación Advertencias Sobre la Conexión Importantes Instrucciones de SeguridadAdvertencias Sobre la Instalación Advertencias Sobre la Conexión de EquiposMontaje Selección del colorInstalación sugerida en bastidor rack con 4 soportes Conexión Enchufe su equipo al sistema UPSEncienda su sistema UPS on Conexión con un puerto USB Conexiones OpcionalesConexión de Puerto DB9 Conexión con un puerto EPOOperación Básica Botones Panel FrontalLuces Indicadoras Panel Frontal Contactos de AC Puerto EPO apagado de emergencia, Emergency Power-OffOtras Funciones del Sistema UPS Panel Posterior Puertos DB9 inteligentesCorto circuito de entrada Ranura para accesoriosConector de baterías externas Corto circuitos de salidaAlmacenaje Almacenaje y ServicioEspecificaciones ServicioGuide de l’utilisateur Mises en garde relatives au raccord du système UPS Mises en garde relatives à l’emplacement du système UPSImportantes consignes de sécurités Mises en garde relatives au raccord de l’équipementInstallation en bâti suggérée pour les boîtiers à 4 piliers MontageSélection des couleurs Branchez votre matériel dans votre système UPS ConnexionReliez un bloc-batterie externe chargé à votre système UPS Mettez votre système UPS en marche « on »Connexion du port USB Connexion facultativeConnexion du port série DB9 Connexion du port d’arrêt d’urgence EPOExploitation de base Boutons panneau avantVoyants lumineaux panneau avant Ports série DB9 intelligents Autres fonctions du système UPS Panneau arrièrePrises c.a Ports USB intelligentsDisjoncteur d’entréer Fente à accessoiresConnecteur de batterie externe Disjoncteurs de sortieEntreposage Entreposage et entretienSpécifications EntretienPage 200306030
Related manuals
Manual 2 pages 34.83 Kb

3U specifications

Tripp Lite 3U is a versatile and robust rack mount solution designed to meet the diverse needs of modern data centers and IT environments. Known for its high-quality construction and reliable performance, this 3U rack mount unit is ideal for housing critical equipment, such as servers, switches, and routers.

One of the standout features of the Tripp Lite 3U is its solid steel construction, which provides durability while maintaining a lightweight profile. This ensures that the unit can withstand the rigors of daily use in demanding environments without compromising the safety of the equipment it houses. Additionally, the sleek design allows for efficient cooling, ensuring that airflow is optimized for the internal components.

The Tripp Lite 3U also boasts convenient accessibility, featuring front and rear mounting options that allow for easy installation and maintenance. This ensures that IT professionals can quickly access servers and networking equipment for upgrades, repairs, or troubleshooting without requiring extensive downtime.

In terms of technology, the Tripp Lite 3U supports various mounting configurations, accommodating various types of equipment, including both standard and oversized devices. This flexibility makes it an excellent choice for organizations looking to standardize their rack solutions while still accommodating specialized hardware.

Another significant characteristic of the Tripp Lite 3U is its compatibility with various standard rack accessories, including shelves, drawers, and cable management systems. This adaptability allows users to create a customized and organized setup that enhances both workflow efficiency and equipment safety.

Furthermore, the Tripp Lite 3U emphasizes safety and compliance, with features such as a locking mechanism that secures sensitive equipment against unauthorized access. This is especially significant in environments where data security is paramount.

In conclusion, the Tripp Lite 3U is a reliable, flexible, and durable rack mount solution. Its robust construction, efficient cooling design, convenient accessibility, and compatibility with a range of accessories make it an ideal choice for any data center or IT infrastructure. Whether housing servers, network equipment, or specialized devices, the Tripp Lite 3U delivers the performance and reliability that today's businesses demand. With its focus on safety and compliance, it is an invaluable addition to any professional setup, ensuring that critical systems remain protected and operational in all conditions.