Philips SC-BT735 Speaker assembly option,  , Preventing the speakers from falling

Page 13

 

Use of the speaker cable stickers is convenient

 

Connecting the speaker cables. Insert the wire fully,

 

4

3

when making cable connections.

taking care not to insert beyond the wire insulation.

 

 

 

e.g. Front speaker (L)

 

e.g. Surround speaker [BT230]

started

FRONT

Lch

ASpeaker cable sticker (included)

B Connector

Speaker cable sticker

Colour

1

FRONT (L)

WHITE

 

 

 

2

FRONT (R)

RED

 

 

 

3

SURROUND (L)

BLUE

 

 

 

4

SURROUND (R)

GREY

 

 

 

5

CENTRE

GREEN

 

 

 

6

SUBWOOFER

PURPLE

 

 

 

Be sure to match the number on each sticker with the connector colour.

r: White

s: Blue line

Push!

Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the speakers.

Don’t use a front speaker as a surround speaker or vice versa. Verify the type of speaker with the label on the rear of the speaker before connecting the appropriate cable.

To avoid injury by falling or dropping the speaker, place the speaker cables with care not to stumble or hook.

Do not hold the speaker in one hand to avoid injury by dropping the speaker when carrying.

Getting

Speaker assembly option

[BT330]

Thread the speaker cable

Attach the speaker.

 

through the base.

Insert the wire fully.

 

Leave about 120 mm

r: White

Push!

 

s: Blue line

 

Press into the groove.

Tighten securely.

Slide into the

You can remove and use the cable from groove. the stand. To reattach the cable, refer to

page 42.

[BT735] [BT330]

Preventing the speakers from falling

≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.

≥Use a string of less than ‰ 2.0 mm, which is capable of supporting over 10 kg.

e.g., [BT735]

AString (not included)

Thread from the wall to the speaker and tie tightly.

BRear of the speaker

CScrew eye (not included) D Wall

E Approx.150 mm

VQT2Q52

13

Image 13
Contents Illustration shows the image of the unit SC-BT735 SC-BT330 SC-BT230Side of product Inside of product This Unit is Intended for USE in Moderate ClimatesThis Plug is not WATERPROOF-KEEP DRY How to replace the fuseBefore use Safety precautions Table of contents Accessory Unit and media care Using the remote controlControl reference guide Remote controlTV operation buttons Power indicator Standby/on switch Í/IMain unit Front Main unit RearPlayable discs/Cards/USB devices Type Logo examples Type detail Playable contentsRegion management information Discs that cannot be played in this unitSD card FinalizeAssembling the speakers Preparing the speakersPreparation BT735 BT330Speaker cable sticker included Connector Colour Speaker assembly option  Preventing the speakers from fallingSetup example Upgrade your system to 7.1-channel systemPositioning If it persists, move the speakers further away from the TVUsing an outdoor antenna Using an indoor antennaConnections Speaker cable connectionBasic connection Connection to a TVConnection for the better audio ≥ Do not make the video connections through the VCRConnection for the best picture and audio Necessary SettingsConnection with Set Top Box, etc Hdmi cable not includedUsing Wireless LAN Adaptor optional Using LAN ethernet cableAC mains lead connection Connection to a broadband networkPreparation Smart setup / Easy setupWhen you experience problems with settings Network Easy SettingSelect Wired or Wireless and press OK Wired connectionNetwork Easy Setting Internet Connection Test Network Easy Setting Connection TestFirmware updating Display CheckTo switch sources Reprogramming the remote controlInserting or removing a media While pressing OKStart menu Selecting the source by the remote controlPress Start Press 3, 4 to select the item and press OK Button SourceEnjoying surround sound effects Adjusting speaker level during playPress Surround several times to select the effect Changing the sound modesPlaying video contents Enjoying BD-Live or Bonusview in BD-Video Useful functionsPlaying picture-in-picture Enjoying BD-Live discs with InternetRegarding DivX Playing musicInsert a disc, SD card or USB device Playing still picturesPress 3, 4, 2, 1 to select the album and press OK Press 3, 4, 2, 1 to select the still picture and press OKPresetting stations manually Presetting stations automaticallyListening/confirming the preset channels Listening to the RadioEnjoying TV with unit’s speakers Making settings for digital audio inputSurround sound effects Sound modesAutomatic input switching Power on link Setting the audio linkLinked operations with the TV One touch playEasy control only with Viera remote control Using the iPod/iPhonePower Off Link IPod/iPhone ConnectionEnjoy music/video IPod/iPhone PlaybackEnjoy photos Other methods of playbackDisc Enjoying Viera CastPress Viera Cast Press 3, 4, 2, 1 to select the item and press OKPicture Play SoundPlayback Information Window When connected to a Panasonic Dlna compatible recorder Diga Dlna featureControl Panel ≥ Press OK if the Control Panel is not displayedUseful functions for when playing back pictures Setup menuPress 3, 4, 2, 1 to select the option and press OK Display TV System TV / Device ConnectionGeneral NetworkAdjusting speaker level Speaker settingsAttaching to a wall Speaker installation optionReattaching the speaker cable Cannot eject disc Contents of the USB device cannot be readRadio IPod/iPhone operationOther difficulties with playback On the television MessagesOn the unit’s display Subtitles text file of DivX DivXStructure of folders that can be played in this unit Display languages list Language code listVideo attribute Audio attributeVQT2Q52 Avchd GlossaryBD-J DTS-HDSpecifications Surround Speakers Centre SpeakerUSB AUXConnection Quick Start Radio Random play Re-master Remote controlJpeg LAN Language On-Screen