Philips SC-BT735 Speaker installation option, Attaching to a wall, Reattaching the speaker cable

Speaker installation option

Attaching to a wall

You can attach all of the speakers (except subwoofer) to a wall.

≥The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.

≥Do not attempt to attach these speakers to walls using methods other than those described in this manual.

1 Drive a screw (not included) into the wall.

A At least 30 mm

B ‰ 4.0 mm

	C ‰ 7.0 mm to 9.4 mm
	D Wall or pillar
	 E 5.5 mm to 7.5 mm





2 Fit the speaker securely onto the screw(s) with the hole(s).

e.g., [BT735] Front speaker

[BT735]: Centre speaker

		

[BT330] [BT230]: Centre speaker
K 117 mm	
L 209 mm to 211 mm
M 97 mm
N 18.8 mm
O 17 mm
P 99 mm to 101 mm	

∫To avoid speaker dropping

[BT735]: Front speaker, Centre speaker, Surround speaker

[BT330]: Front speaker

e.g., [BT735]: Front speaker



DO NOT DO





≥ In this position, the speaker	≥ Move the speaker so
will likely fall if moved to the	that the screw is in this
left or right.	position.

[BT735]: Front speaker, Surround speaker

[BT330]: Front speaker

Attach to a wall without the base and the stand.

[BT735]	[BT330]
	

	
	

[BT330]: Surround speaker [BT230]: Front speaker, Surround speaker

F97 mm

G210 mm to 212 mm

VQT2Q52 H	72 mm
42 I	349 mm to 351 mm

J26 mm

A String (not included)

B Screw eye (not included) C Less than 10 cm

D Rear of the speaker

≥Consult a qualified building contractor to avoid damage to the wall or speakers.

≥Use a string of less than ‰ 2.0 mm, which is capable of supporting over 10 kg.

Reattaching the speaker cable

[BT330]

Leave about 120 mm

Insert the cable	Pull out the cable
from the bottom.	through the hole.