UPS Location Warnings, Battery Warnings

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed during the installation, operation and storage of this product. Failure to heed these warnings will void your warranty.

UPS Location Warnings

•Install your UPS indoors, away from excess moisture or heat, conductive contaminants, dust or direct sunlight.

•For best performance, keep the indoor temperature between 32º F and 104º F (0º C and 40º C).

•Leave adequate space around all sides of the UPS for proper ventilation.

•Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this manner will seriously inhibit the unit's internal cooling, eventually causing product damage not covered under warranty.

UPS Connection Warnings

•Connect your UPS directly to a properly grounded AC power outlet. Do not plug the UPS into itself; this will damage the UPS.

•Do not modify the UPS’s plug, and do not use an adapter that would eliminate the UPS’s ground connection.

•Do not use extension cords to connect the UPS to an AC outlet. Your warranty will be voided if anything other than Tripp Lite surge suppressors are used to connect your UPS to an outlet.

•If the UPS receives power from a motor-powered AC generator, the generator must provide clean, filtered, computer-grade output.

Equipment Connection Warnings

•Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.

•Do not connect surge suppressors or extension cords to the output of your UPS. This might damage the UPS and will void the surge suppressor and UPS warranties.

Battery Warnings

•Your UPS does not require routine maintenance. Do not open your UPS for any reason. There are no user- serviceable parts inside.

•Batteries can present a risk of electrical shock and burn from high short-circuit current. Observe proper precautions. Do not dispose of the batteries in a fire. Do not open the UPS or batteries. Do not short or bridge the battery terminals with any object. Unplug and turn off the UPS before performing battery replacement. Use tools with insulated handles. There are no user-serviceable parts inside the UPS. Battery replacement should be performed only by authorized service personnel using the same number and type of batteries (sealed Lead-Acid). The batteries are recyclable. Refer to your local codes for disposal requirements or in the USA only call 1-800-SAV-LEAD or 1-800-8-BATTERY (1-800-822-8837) or visit www.rbrc.com for recycling information. Tripp Lite offers a complete line of UPS System Replacement Battery Cartridges (R.B.C.).Visit Tripp Lite on the web at www.tripplite.com/support/battery/index.cfm to locate the specific replacement battery for your UPS.

•Do not attempt to add external batteries to the UPS.

Quick Installation

1.Plug the UPS into an outlet that doesn’t share a circuit with a heavy electrical load.*

* An air conditioner, refrigerator, etc.

2.Turn the UPS on: Press and hold the ON/OFF/TEST button for one second to turn the UPS on. The UPS

alarm will beep once briefly after one second has passed. NOTE: The UPS will not turn on, even if connected to live utility power, until it is turned on using the ON/OFF/TEST button.

3.Plug your equipment into the UPS: Select outlets (see Basic Operation section) will provide battery backup and surge protection; connect your computer, monitor and other critical devices here.* Select outlets (see Basic Operation section) will provide surge protection only; connect your printer and other non-essential devices here.

*Your UPS is designed to support electronic equipment only. You will overload the UPS if the total VA ratings for all the equipment you connect to the Battery Backup Protected/Surge Protected outlets exceeds the UPS’s Output Capacity. To find your equipment’s VA ratings, look on their nameplates. If the equipment is listed in amps, multiply the number of amps by 120 to determine VA. (Example: 1 amp × 120 = 120 VA). If you are unsure if you have overloaded the Battery Backup Protected/Surge Protected outlets, run a self- test (see “ON/OFF/TEST” Button description).

POS Series specifications

The Tripp Lite POS Series represents a significant advancement in point-of-sale (POS) technology, offering a comprehensive solution designed to enhance retail and business operations. Known for its reliability and robust performance, this series is engineered to meet the demanding needs of modern businesses.

One of the standout features of the Tripp Lite POS Series is its versatility. The series includes a range of POS equipment such as monitors, cash drawers, receipt printers, and barcode scanners. This wide selection ensures that businesses can find the right combination of devices to create an effective and efficient POS system that suits their specific needs.

The POS monitors in this series come equipped with high-definition displays that offer sharp, vibrant visuals. Many models feature touchscreen capabilities, allowing for intuitive interaction that streamlines the checkout process. These monitors are designed to withstand the daily rigors of retail environments, ensuring longevity and faster response times.

The Tripp Lite POS Series also boasts advanced connectivity options. With USB, Ethernet, and serial ports, these devices can easily integrate with existing systems, facilitating seamless communication between hardware components. This is particularly important for businesses looking to upgrade their systems without having to replace all of their existing equipment.

Security is another critical aspect of the POS Series. The devices are built with features that help protect sensitive customer data, complying with Payment Card Industry Data Security Standards (PCI DSS). This commitment to security helps businesses build trust with their customers, ensuring a safe transaction environment.

Additionally, the Tripp Lite POS Series includes energy-efficient products that help businesses reduce their carbon footprint while lowering energy costs. Many devices are designed with power-saving technologies that automatically reduce energy consumption during periods of inactivity.

Finally, user-friendliness is a hallmark of the Tripp Lite POS Series, making it easy for employees to learn and operate the system with minimal training. This ease of use can enhance employee productivity and improve customer service effectiveness, ultimately contributing to a better overall consumer experience.

In conclusion, the Tripp Lite POS Series combines reliability, innovation, and practical features, making it an excellent choice for businesses aiming to enhance their point-of-sale operations. With its focus on advanced technology, security, and user-friendly design, the Tripp Lite POS Series stands out as a leading solution in the ever-evolving retail landscape.