Manuals / Snapper / Lawn and Garden / Lawn Mower

Snapper LT150H38GKV, LT145H38GBV Battery Battery Removal, Battery Installation, Battery Service

Models: WLT145H38GBV LT150H38GKV LT145H38GBV

1 44
Download 44 pages 39.1 Kb
Page 30
Image 30

Section 4 - ADJUSTMENT & REPAIR

4.5BATTERY

4.5.1. BATTERY REMOVAL

1.Raise operator's seat.

2.Remove the two adjusting knobs.

3.Remove seat assembly and move forward. Use care not to disconnect wires from seat switch. See Figure 4.41.

REMOVE ADJUSTING

KNOBS AND MOVE

SEAT FORWARD

FIGURE 4.41

4.Remove negative ( - ) cable first.

5.Remove positive ( + ) cable last.

6.Remove battery. See Figure 4.42.

WARNING

Cables must be connected to battery terminals in the proper position as shown in Figure 4.42. DO NOT attempt to charge battery while installed on tractor. DO NOT use "BOOST" chargers on the battery.

REMOVE POSITIVE

(+) CABLE LAST

REMOVE NEGATIVE (-)

CABLE FIRST

FIGURE 4.42

4.5.2.BATTERY INSTALLATION

1.Slide battery into battery housing.

2.Connect positive (+) cable first.

3.Connect negative (-) cable last.

4.Reinstall seat assembly. Use care not to disconnect wires from seat switch.

5.Reinstall the two adjusting knobs.

6.Lower operator's seat.

WARNING

The electrolyte (acid) produces a highly explosive gas. Keep all sparks, flame and fire away from area when charging battery or when handling electrolyte or battery. Electrolyte (acid) is a highly corrosive liquid. Wear eye protection. Wash affected areas immediately after having eye or skin contact with electrolyte (acid). Battery acid is corrosive. Rinse empty acid containers with water and mutilate before discarding. If acid is spilled on battery, bench, or clothing, etc., Flush with clear water and neutralize with baking soda.

4.5.3.BATTERY SERVICE

1.Remove battery. See Section on Battery Removal.

2.Place battery in a well ventilated area on a level surface.

3.Using distilled water, refill cells as required to cover cell plates of which can also be visualized through the plastic battery case.

4.With cell caps removed, connect battery charger to battery terminals. Red to positive (+) terminal and black to negative (-) terminal.

5.Slow charge battery at 1 amp for 10 hours.

6.If battery will not accept charge or is partially charged after 10 hours of charging at 1 amp, replace with new battery.

4.5.4.BATTERY STORAGE

When out of season, it is recommended the battery be removed, charged and stored.

1.Remove battery. (Refer to Section “BATTERY REMOVAL”).

2.Perform battery service.

3.Bring battery to full charge, if required.

4.Store battery in an area away from the RIDER on a wood surface. DO NOT STORE BATTERY ON A CONCRETE SURFACE.

WARNING

DO NOT attempt to charge battery while installed on the machine. DO NOT use “BOOST” chargers on the battery. DO NOT OVERFILL!

30

Page 29 Page 31
Page 30
Image 30
Snapper LT150H38GKV, LT145H38GBV Battery Battery Removal, Battery Installation, Battery Service, Battery Storage
Page 29 Page 31

WLT145H38GBV, LT150H38GKV, LT145H38GBV specifications

The Snapper LT145H38GBV, LT150H38GKV, and WLT145H38GBV are robust lawn tractors designed to provide efficient and reliable performance for homeowners and landscaping professionals alike. Each model offers a unique combination of features and technologies that enhance usability, comfort, and mowing precision.

The Snapper LT145H38GBV is powered by a 14.5 horsepower Briggs & Stratton engine, providing ample power for tackling various mowing tasks. It features a 38-inch cutting deck, made of durable steel, which allows for an optimal cutting width, making the mowing process quicker and more efficient. The LT145H38GBV also incorporates a convenient foot pedal-operated hydrostatic transmission, allowing smooth acceleration and effortless speed control without any gear shifting.

Next, the Snapper LT150H38GKV stands out with its 15 horsepower Kohler engine. This model offers increased power, making it suitable for larger lawns or tougher grass conditions. Like the LT145, it boasts a 38-inch cutting deck, but the LT150H38GKV is also equipped with a high-back seat for added comfort during longer mowing sessions. Its sturdy construction ensures durability, while its easy-to-use dashboard controls provide a user-friendly experience.

Finally, the Snapper WLT145H38GBV offers similar features to the other models but adds versatility to the mix with its wider range of capabilities. This model is designed with a tight turning radius, making it easier to navigate around flower beds and trees. The WLT145H38GBV is also powered by a reliable 14.5 horsepower engine, ensuring efficient power delivery. Its cutting deck features multiple height-adjustment settings, allowing users to customize their mowing experience according to grass types and preferences.

All three models incorporate Snapper's innovative technologies, such as the easy-access under-deck washout port that simplifies the cleaning process and supports maintenance. They also come with a variety of cutting options, providing both side discharge and mulching capabilities, enhancing lawn health and appearance. With their user-friendly designs, ample power, and strong construction, the Snapper LT145H38GBV, LT150H38GKV, and WLT145H38GBV represent an excellent choice for anyone seeking reliable lawn care solutions.