Tripp Lite PRO550 Storage, Service, Two symbols are used on the label ~ AC Voltage V DC Voltage

Page 6

Storage and Service

Storage

First, turn the UPS system OFF by pressing the ON/OFF/TEST/MUTE button for 1 second (the UPS will beep and the green ON/OFF light will cease to illuminate). Second, disconnect connected equipment. Third, disconnect the power cord from the wall outlet. If the UPS system will be stored for an extended period of time, recharge the batteries completely once every three months by connecting the UPS system to a live AC outlet and turning it on for 8 hours. If the UPS batteries are discharged for an extended period of time, they may suffer permanent loss of capacity.

Service

Before returning your UPS for service, follow these steps:

1.Review the installation and operation instructions in this manual to ensure that the service problem does not originate from a misreading of the instructions.

2.If the problem continues, do not contact or return the UPS to the dealer. Instead, call Tripp Lite at (773) 869-1233. A service technician will ask for the UPS’s model number, serial number and purchase date and will attempt to correct the problem over the phone.

3.If the problem requires service, the technician will issue you a Returned Material Authorization (RMA) number, which is required for service. If you require packaging, the technician can arrange to send you proper packaging. Securely pack the UPS to avoid damage during shipping. Do not use Styrofoam beads for packaging. Any damages (direct, indirect, special, incidental or consequential) to the UPS incurred during shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty. UPS Systems shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid. Mark the RMA number on the outside of the package. If the UPS System is within the 2-year warranty period, enclose a copy of your sales receipt. Return the UPS for service using an insured carrier to the address given to you by the Tripp Lite service technician.

Note on Labeling

Two symbols are used on the label:

V~ AC Voltage V DC Voltage

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series num- ber. The series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number. The series number should not be confused with the marking name or model number of the product.

Tripp Lite has a policy of continuous improvement. Product specifications are subject to change without notice.

Made in China.

1111 W. 35th Street, Chicago, IL 60609 USA

(773) 869-1234 • www.tripplite.com

6

Image 6
Contents Omnipower UPS System Th Street, Chicago, IL 60609 USAUPS Location Warnings Important Safety InstructionsBattery Warnings UPS Connection WarningsOutput Connections Power OnInput Connection Plug your equipment into the UPS outletsPower ON/OFF On Battery / Low Battery / OverloadAutomatic Voltage Regulation AVR Mute Alarm UPS Self-TestUPS Cold Start Service Two symbols are used on the label ~ AC Voltage V DC VoltageStorage Manual del Propietario Advertencias para Conectar el UPS Instrucciones de Seguridad ImportantesAdvertencias Sobre la Ubicación del UPS Advertencias para la Conexión del EquipoConexiones de Salida Conexión de EntradaEncendiéndolo Enchufe su equipo en las toma de corriente del UPSEncendido/Apagado Regulación Automática de Voltaje AVREn Respaldo / Batería Baja / Sobre Carga Operación Básica continuación Almacenaje y Servicio continuación Nota Sobre el Etiquetado