Rear Panels

20kVA and 30kVA Power Modules Rear Panel	20kVA & 30kVA Battery Module Rear Panel
Models: SU20K3/3INTPM and SU30K3/3INTPM	Model: BP240V33

1.Manual Bypass Switch: This dial is used in one step of putting the UPS in "BYPASS” mode, which must be done before performing any maintenance on the UPS with the connected load supported. [See “Operation (Special Conditions)” for step-by-step instructions for going into “BYPASS.”] While this switch is on “BYPASS,” connected equipment will receive filtered AC mains power, but will not receive battery power in the event of a blackout.

2.Input Terminal Block: Use these terminals to connect your UPS to the AC main power input. Unscrew and remove terminal block plate for access.

3.Output Terminal Block: Use these terminals to connect your UPS to equipment. A plate covering the terminal block must be unscrewed and removed for access.

4.External Battery Terminal Block: Use this to connect a Tripp Lite battery module to the power module. Remove the cover for access. The power module will not start without a connection to a charged battery module.

5.Exhaust Fans: These cool and ventilate the inside of the UPS.

6.AS-400 Interface Port: This female DB9 port connects your UPS to an IBM AS-400 computer interface via the AS-400 Cable includ- ed. It uses AS-400 communications to report UPS status and power conditions. Using this port, an IBM AS-400 computer can automati- cally save open files and shut down its operating system during a blackout. See “Communications” for details.

7.“Smart” RS-232 Interface Port: This female DB9 port connects your UPS to a workstation or server. It uses RS-232 communications to report UPS and power conditions. It is used with Tripp Lite software and the included RS-232 Cable to monitor and manage network power and to automatically save open files and shut down equipment during a blackout. See “Communications” for details.

8.Dry Contact Interface Port: This female DB9 port sends contact-closure signals to indicate line-fail and low-battery status. See “Communications,” for details.

9.Accessory Slot: Remove the small cover panel and use optional accessories to remotely control and monitor your UPS. Contact Tripp Lite Customer Support for more information and a list of available SNMP, network management and connectivity products.

10.“Battery Start” Switch: This momentary rocker switch allows you to “cold-start” your UPS and use it as a stand-alone power source when utility-supplied AC power is not present. The switch enables the UPS’s DC/AC Inverter. Before “cold-starting” your UPS, make sure your power module and external battery module(s) are properly installed. Press and hold the “Battery Start” Switch and then press the “ON” button to turn your UPS ON. To turn it OFF after “cold-start,” press the “OFF” button.

11.AC Input Switch: One triple-pole circuit breaker controls input power to the UPS during normal operation.

12.Bypass AC Input Switch: One triple-pole circuit breaker controls input power to the UPS during “BYPASS” operation.

13.Remote “Emergency Power OFF” (EPO) Connector: This modular jack allows remote emergency shutdown. See “Communications” for details.

240/415V, 220/380, 230/400 specifications

Tripp Lite is a well-known manufacturer in the power management and connectivity solutions sector, and their products often cater to various power requirements across industries. Among their offerings are the Tripp Lite 230/400V, 220/380V, and 240/415V models, designed to provide high-quality power solutions for industrial and commercial applications.

One of the core features of these systems is the ability to handle different voltage requirements, making them highly versatile in various environments. The 230/400V model is particularly suitable for European and global standards, ensuring compatibility with a wide range of electrical systems. Meanwhile, the 220/380V and 240/415V variants provide additional flexibility for specialized applications, allowing users to seamlessly switch between different voltage levels while maintaining consistent performance.

The technology behind these models is rooted in advanced voltage regulation and surge protection. Each unit is equipped with superior surge protection features designed to safeguard connected equipment from power spikes, ensuring longevity and reliability. This is particularly important in industrial settings where machinery and sensitive electronics are often exposed to power fluctuations.

In terms of power distribution, these Tripp Lite models come with multiple output options to accommodate various devices simultaneously. The layout is designed for optimal space utilization, allowing users to maximize efficiency in tight environments. Additionally, many units are equipped with intelligent LCD displays, offering real-time monitoring of voltage, load, and runtime statistics. This feature empowers users to make informed decisions about their power management, enhancing overall operational efficiency.

Reliability is a key characteristic of Tripp Lite products, and these models are no exception. Built with high-quality components, they are rugged and durable, designed to withstand harsh conditions often found in industrial settings. Furthermore, their fanless designs minimize noise, making them suitable for use in environments where sound is a concern.

Another important aspect is scalability. Businesses can easily integrate these systems into their existing infrastructure and expand as necessary. With Tripp Lite's commitment to quality and performance, the 230/400, 220/380, and 240/415V models serve as reliable and efficient solutions for various power management needs across different sectors, from manufacturing to data centers. Their combination of advanced technology, robust design, and user-friendly features ensures they remain a popular choice in the industry.