Philips MX-3700D warranty Special DVD/VCD features

E n g l i s h

Repeat play

You can only select the repeat play mode during playback.

For DVD - Repeat chapter/title/disc

●Press REPEAT repeatedly to select the following :

➜“R-1” – repeat chapter.

➜“R-A” – repeat title/disc.

For VCD/CD/MP3-CD - Repeat track/disc

●Press REPEAT repeatedly to select the following :

➜“R-1” – repeat the current track.

➜“R-A” – repeat the entire disc.

Notes:

–Repeat play might not work correctly with some DVDs.

–For VCD, repeat play is not possible during PBC playback.

Repeat A-B

You can play a specific section in a chapter/track repeatedly.

1Press REPEAT A-Bat your chosen starting point.

2Press REPEAT A-Bagain at your chosen end point. ➜ The passage will now repeat continuously.

3To resume normal play, press REPEAT A-Bagain.

Note:

– The section A and B can be set only within the same chapter/track.

Program favorite tracks

You can play the contents of the disc in the order you want by programming the order of the tracks to be played. Up to 99 tracks can be stored.

1While playback is stopped, select or press PROGRAM to enter program mode.

➜“P 00:00” is displayed.

2Use the numeric keypad (0-9)to input the track number in the order you want.

➜If you attempt to program more than 99 tracks, "FULL" is displayed.

3Press OK to store the track.

●Repeat steps 2-3to store other tracks.

4To start program play, pressÉÅ.

5To stop playback, press Ç once.

6To cancel the program, press Ç again.

Program function can also be accessed via the menu bar

1Press SYSTEM MENU and select from the menu bar.

2Repeat steps 2-6listed above to program your favorite tracks.

Special DVD/VCD features

A number of operations can be carried out directly via the multiple menu bars on the TV screen without interrupting disc playback.

From the left,

SETUP MENU ™ SUBTITLE ™ LANGUAGE ™ SLOW

™FAST REVERSE ™ FAST FORWARD ™ STATUS

From the left,

TITLE SEARCH ™ CHAPTER SEARCH ™TIME SEARCH ™ ZOOM ™ ANGLE ™ STEP ™ PBC ON/OFF

From the left,

PROGRAM

IMPORTANT!

Some operations may be different or restricted, depending on the disc format. Refer to the jacket or case of the disc you are playing.

1Press SYSTEM MENU.

➜ The menu bar will be displayed across the top of the TV screen.

2Press 1 or 2 to move through the menu bar.

3Press 4 to select the highlighted icon and use 34 keys to select your preferred option.

4Press OK to confirm a highlighted selection.

5To exit, press SYSTEM MENU or OK.

Changing subtitle language

This operation works only on DVDs with multiple subtitle languages.

●Select from the menu bar and press 4 key to select the desired language.

18OPERATIONS

pg 01-25/MX36-37xx/37-Eng 18 4/18/02, 5:56 PM