Philips MX-3700D warranty Listening to preset radio stations, Sleep timer setting

pg 01-25/MX36-37xx/37-Eng

22

Notes:

– If you attempt to program more than 40 preset radio stations, "FULL" is displayed.

– During programming, if no key is pressed within five seconds, the system will exit the program mode automatically.

22 OTHER FUNCTIONS

Repeat

steps 1–4to store other radio stations.

●

Press PROGRAM again to store the radio station.

4

Program

3 Use the numeric keypad (0-9)to select the desired preset number.

Program

Note:

– If “Program” icon goes off before you select the desired preset number, press PROGRAM again.

Press PROGRAM.

➜ “Program” appears.

2

Tune to your desired radio station (refer to “Tuning to radio stations”).

1

station.

Presetting radio stations

You can preset up to 40 stations regardless of the reception.

Repeat

if necessary until you find the desired radio

step 4

5

mode.

3 Press TUNER again to select the desired band : FM or AM.

4 Press and hold S or T until the frequency indication starts to change, then release.

➜ The system automatically tunes to the next strong radio station.

● To tune to a weak station, press S or T briefly and repeatedly until an optimal reception is found.

Adjust SOURCE (or press TUNER) to select TUNER

2

Press STANDBY ON to switch on the last selected source.

1

Other Functions

Tuning to radio stations

E n g l i s h

Listening to preset radio stations

●In tuner mode, press 1 or 2 or use the numeric keypad (0-9)to select the desired preset number.

➜ The preset number, radio frequency, and waveband are displayed.

Sleep timer setting

The sleep timer enables the system to switch to standby mode automatically at a preset time.

1Press SLEEP repeatedly to select a preset time.

➜The selections are as follows (time in minutes):

15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120™ OFF ™ 15...

2When you reach the desired length of time, stop pressing the SLEEP button.

➜“Sleep” icon appears.

To check the remaining length of time after sleep timer is activated

●Press SLEEP once.

To change the preset sleep timer

●Press SLEEP again while the remaining sleep timer is shown.

➜ The display will show the next sleep timer options.

To deactivate the sleep timer

●Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button.

4/18/02, 5:56 PM