Philips MX2500D, 78 user manual Connecting FM/MW Antennas Power cord

Page 10

En gli sh

Connections

Step 4: Connecting FM/MW	Step 5: Connecting the
antennas	power cord

fix the claw into	1
the slot	MW
	antenna

➠	1
	FM
	antenna

2

2

FRONT FRONT FRONT REAR REAR SUBWOOFER RIGHT LEFT CENTER RIGHT LEFT

~ AC MAINS

Power Outlet

1Connect the supplied MW loop antenna to the MW jack. Place the MW loop antenna on a shelf or attach it to a stand or wall.

2Connect the supplied FM antenna to the FM (75Ω ) jack. Extend the FM antenna and fix its ends to the wall.

For better FM stereo reception, connect an external FM antenna (not supplied).

Helpful Hints:

–Adjust the position of the antennas for optimal reception.

–Position the antennas as far as possible from your TV,VCR or other radiation source to prevent unwanted interference.

10

After everything is connected properly,

1Set the VOLTAGE SELECTOR to the local power line voltage.

2Plug in the AC power cord to the power outlet.

Never make or change any connections with the power switched on.

Helpful Hint:

– Refer to the type plate on the rear or bottom of the system for identification and supply ratings.

001-035-MX2500D-78-Eng2

10

7/20/04, 3:11 PM

8239 300 32892

Image 10

Contents DVD Video Home Theatre System Localidad y Tel MéxicoReproductor de Disco de Video Digital País de OrigenIndex Português Español EnglishContents General Information Supplied accessoriesCare and safety information EnglishConnections Placing the speakers and subwooferConnecting speakers and subwoofer Set the P-SCANswitch to ‘OFF’ Connecting TVUsing Composite Video jack Using Component Video jack Y Pb/Cb Pr/CrUsing S-Video jack Using an accessory RF modulatorConnecting FM/MW Antennas Power cord Plug in the AC power cord to the power outletConnect the VCR or Cable/Satellite Box to the TV as shown Using the VCR for recording DVD playbackViewing and listening to the playback Pb/Cb Pr/Cr video connectionMain unit and remote control Functional OverviewSound @ Disc MenuSurround RepeatAim the remote control Setting the TVUsing the remote control to operate the system Getting StartedMove to Press Move to TV System and press Setting the TV shapeSelecting the colour system that corresponds to your TV Move to Press Move to TV Shape and pressAdjusting the speaker output levels Setting the speakersAdjusting the delay time Test Tone Turning on/offAudio, Subtitle and Disc menu languages Setting language preferencesOn-screen display OSD language System MenuPlaying discs Disc OperationsPlayable discs Your DVD home cinema system will playBasic playback controls Using the Disc MenuResuming playback from the last stopped point DVD/VCD/CD Programme favourite tracks audio CDs and VCDs Repeat play modeSelecting various repeat functions Repeating a section within a chapter/track DVD/VCD/CDTo clear the programme Using the menu bar to programmePlaying MP3/Picture disc Kodak, Jpeg Jpeg and MP3 simultaneously playbackUsing the menu bar DVD Setup Menu OptionsPress System Menu again to remove the menu Video Setting the video outputPicture Setup Sound Setup Language Setup Feature Setup PR PB Y / ScartPCM 96 kHz OFFALL PCM 48 kHzRestoring to original settings Night mode turning on/offReset Move to and press Move to Parental and press G l i s h Restricting playback by Parental ControlRating explanations Changing the password Selecting a preset radio station Tuning to radio stationsPresetting radio stations Tuner OperationsTo check or change the setting Changing tuning gridSetting the Sleep Timer To cancel the sleep timerSound Control Volume controlUsing the remote to operate ‘Philips’ television Dimming system’s display screenSpecifications Problem TroubleshootingSolution Press System Setup to turn off the setup menu screen Glossary Glossary Quick USE Guide 12nc 8239 300Playing a disc Using the DVD setup menuNo picture?