Philips 78 Viewing and listening to the playback, Using the VCR for recording DVD playback

	Connections (optional)
Connecting a VCR or	Connecting digital audio
Cable/Satellite Box	equipment

English

1

OUT IN

TO TV

VIDEO

VCR or Cable/

S-VIDEO

IN Satellite Box

AUDIO

2	3
	4

FRONT FRONT FRONT REAR		REAR SUBWOOFER
RIGHT	LEFT CENTER RIGHT	LEFT

DIGITAL IN

(for example) CD Recorder

FRONT FRONT FRONT REAR		REAR SUBWOOFER
RIGHT	LEFT CENTER RIGHT	LEFT

Viewing and listening to the playback

1Connect the VCR or Cable/Satellite Box to the TV as shown.

2Connect the DVD system’s AUDIO IN- AUX jacks to the AUDIO OUT jacks on the VCR or cable/satellite box.

Before starting operation, press AUX on the remote to select “AUX” in order to activate the input source.

Using the VCR for recording DVD playback

3Connect the DVD system’s VIDEO OUT jack to the VIDEO IN jack on the VCR.

4Connect the DVD system’s LINE OUT jacks to the AUDIO IN jacks on theVCR. This will allow you to make analogue stereo (two channel, right and left) recordings.

To view DVD playback while recording, you must connect the DVD system to your TV using S-VIDEO (as shown above) or Component

(Y Pb/Cb Pr/Cr) video connection.

Digital Recording

1Connect the DVD system’s DIGITAL OUT-COAXIALjack to the DIGITAL COAXIAL IN jack on a digital recording device (such as Dolby Digital decoder, CD recorder).

Before starting operation, set the DIGITAL OUTPUT according to the audio connection. (See page 24 “Setting the digital output”).

Helpful Hints:

–Some DVDs are copy-protected. You cannot record the disc through a VCR or digital recording device.

–Always refer to the owner’s manual of the other equipment for complete connection and usage details.

11

001-035-MX2500D-78-Eng2 11 7/20/04, 3:11 PM 8239 300 32892