Tuner Operations | Other Functions | ||
|
|
|
|
Changing tuning grid
(not available for all versions)
In some countries, the frequency step between adjacent channels in the MW band is 9 kHz (10 kHz in some areas).
The preset frequency step in the factory is 9 kHz.
IMPORTANT!
Changing the tuning grid will erase all previously stored preset radio stations.
●Press and hold down PLAY/PAUSE ÉÅ button on front panel for more than five
seconds.
➜The display will show "GRID 9" or "GRID 10".
Helpful Hints:
–GRID 9 and GRID 10 indicate that the tuning grid is in step of 9 kHz and 10 kHz respectively.
–The FM tuning grid also will be changed from 50 kHz to 100 kHz or vice versa.
Setting the Sleep Timer
The sleep timer enables the system to switch to standby mode automatically at a preset time.
●Press SLEEP repeatedly until it reaches the desired preset
➜The selections are as follows (time in minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120
™OFF ™ 15 …
➜“SLEEP” icon will show on the display, except if "OFF" is selected.
To check or change the setting
●Press SLEEP once to show the remaining time before switching off. If you continue pressing the SLEEP button, the next Sleep Timer option will appear.
To cancel the sleep timer
●Press SLEEP repeatedly until "OFF" appears or press the STANDBY ON button.
E n g l i s h
29
29 | 7/20/04, 3:12 PM | 8239 300 32892 |