Tripp Lite B004-2DUA2-K, B004-2DUA4-K owner manual Port Switching Hotkeys

Basic Operation

Port Switching Hotkeys

To switch functionality between ports, a keyboard hotkey command is entered that determines what port is accessed and which functionality is assigned to it. This command starts by pressing [Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl]. [Scroll Lock] [Scroll Lock] is used by default. To toggle between these two, see Alternate Port Switching Hotkey Command in the Hotkey Setting Mode section of this manual.

The table below contains the Port Switching Hotkeys used to determine what port is accessed and which functionality is assigned to it. Note: The table below uses the [Scroll Lock] [Scroll Lock] preceding sequence. Simply substitute [Ctrl][Ctrl] if you decide to change the Hotkey Preceding Sequence.

Hotkey Command	Action
[Scroll Lock] [Scroll Lock] [Enter]	Switches focus of the KVM, Audio and USB
	from the port that currently has the KVM
	focus to the port that follows it. (e.g. 1 to 2,
	2 to 3, etc.)
[Scroll Lock] [Scroll Lock] [K] [Enter]	Switches focus of the KVM only from the port
	that currently has the KVM focus to the port
	that follows it.
[Scroll Lock] [Scroll Lock] [U] [Enter]	Switches focus of the USB only from the port
	that currently has the USB focus to the port
	that follows it.
[Scroll Lock] [Scroll Lock] [S] [Enter]	Switches focus of the Audio only from the
	port that currently has the Audio focus to the
	port that follows it.
[Scroll Lock] [Scroll Lock] [n]* [Enter]	Switches focus of the KVM, Audio and USB to
	the selected port number.
[Scroll Lock] [Scroll Lock] [n]* [K] [Enter]	Switches focus of the KVM only to the se-
	lected port number.
[Scroll Lock] [Scroll Lock] [n]* [U] [Enter]	Switches focus of the USB only to the se-
	lected port number.
[Scroll Lock] [Scroll Lock] [n]* [S] [Enter]	Switches focus of the Audio only to the se-
	lected port number.
[Scroll Lock] [Scroll Lock] [n]* [K] [U] [Enter]	Switches focus of the KVM and USB to the
	selected port number.
[Scroll Lock] [Scroll Lock] [n]* [K] [S] [Enter]	Switches focus of the KVM and Audio to the
	selected port number.
[Scroll Lock] [Scroll Lock] [n]* [U] [S] [Enter]	Switches focus of the USB and Audio to the
	selected port number.
[Scroll Lock] [Scroll Lock] [n]* [K] [S] [U] [Enter]	Switches focus of the KVM, Audio and USB to
	the selected port number.
[Scroll Lock] [Scroll Lock] [A] [Enter]	Initiates Auto Scan mode at the default inter-
	val of 5 seconds per port. Press the [Esc] or
	[Spacebar] key to exit Auto Scan mode.
[Scroll Lock] [Scroll Lock] [A] [n]* [Enter]	Initiates Auto Scan mode at the selected time
	interval. Press the [Esc] or [Spacebar] key to
	exit Auto Scan mode.

*[n] stands for the port number of the computer that you are switching to, or the number of seconds (from 1 to 99) that an Auto Scan remains on each port.

13

13-09-063-933242-EN.indd 13 9/10/2013 4:45:02 PM