Tripp Lite B004-2DUA4-K, B004-2DUA2-K owner manual Front Panel

Features

Front Panel

1

2

1

3

3

4 5

No. Component Description

1Port Selection Pressing one of the port selection pushbuttons will bring Pushbuttons the focus of one of the following to the corresponding port;

KVM only, Audio only, USB only, or KVM, Audio and USB simultaneously. What functionality is switched is determined by the Mode Selection Pushbutton (see below).

		Pressing and holding pushbuttons 1 and 2 simultaneously
		for more than 2 seconds will initiate an auto scan. On the
		B004-2DUA4-K, pressing and holding pushbuttons 3 and 4
		simultaneously for more than 2 seconds will perform a USB
		keyboard/mouse reset.
2	Mode	Press this pushbutton to determine the functionality that is
	Selection	switched to a port when its pushbutton is pressed. Pressing the
	Pushbutton	mode selection pushbutton once highlights the KVM, Audio and

USB functionality icons all at the same time. Pressing it twice highlights KVM only; three times Audio only; and four times USB only.

3Port LEDs Each port contains three LEDs; KVM, Audio, and USB. The corresponding LED will illuminate under the port that has its focus. For example, if port 1 has the focus of the KVM, Audio, and USB all at the same time, then all three LEDs will illuminate under port 1.

4Console Audio A separate set of Console Speaker and Microphone jacks are

Connectors located on the front panel of the unit for greater accessibility. Devices plugged into these ports will take priority over devices plugged into the Console Speaker and Microphone jacks on the back panel of the unit.

5	USB 2.0	USB 2.0 devices (flash drives, printers, scanners, etc.) can
	Peripheral Port	be plugged into this port and shared between the connected

computers.

4

13-09-063-933242-EN.indd 4 9/10/2013 4:45:01 PM