Installation
Before you begin, make sure that power to all the devices you will be connecting up have been turned off.
1.Plug the keyboard and mouse into the appropriate ports on the front of the KVM switch. Connect the monitor to the Console port located on the back of the switch.
2.Use the cables in the cable kit (see Hardware Requirements section) to connect the monitor, key board and mouse ports of each of the PCs to the appropriate ports on the back of the switch.
3.Turn on the power to the connected PCs.
Note: The switch’s Power On default links the switch to the first computer you turn on.
Warning: Do not switch between PCs during boot- up procedure.
Operation
Manual Port Selection
Press the Port Selection button on the KVM Switch to switch between computers. The LED lights to indicate which port is active.
4