Installation
Pre-Installation Guidelines
•Switch off all computers
•Ensure that the cables are not close to any sources of electrical noise interference such as fluorescent lights, HVAC systems or motors
•Ensure that the distance between any computer and the KVM switch does not exceed 33 ft.
Connecting the NetCommander KVM System
Connect each computer to the KVM using a Server Interface Unit (SIU) and Cat5e patch cable (for best results, use STP
Figure 4 NetCommander KVM system connections
NetCommander Server Interface Unit (SIU)
The NetCommander Server Interface Unit
The Server Interface Unit gets its power from the connected computer. In the case of the NetCommander PS/2 Server Interface Unit
Connecting a NetCommander PS/2 Server Interface Unit
To connect the PS/2 Server Interface Unit:
1.Connect the VGA connector to the computer's Video card.
2.Connect the PS/2 Keyboard connector to the computer's Keyboard port.
3.Connect the PS/2 Mouse connector to the computer's Mouse port.
5