Installation (continued)
Cascading NetCommander KVM Switches
To cascade two or more NetCommander KVM switches, follow the connections in the figure below.
Setting the different OSD display hotkeys is explained on page 11.
SIU = Server Interface Unit
Figure 8 Cascading NetCommander KVM switches
Operation
Basic Operation
Switch between the connected computers using any of the following methods:
•The OSD (On Screen Display)
•Keyboard hotkey commands
•Manual selection buttons on the front panel The OSD is also used to adjust various settings.
The illuminated LED of the top row of LEDs identifies which computer is currently selected.
Keyboard Hotkeys
To switch to the next computer, press and release the [Shift] key, then press the [+] key.
To switch to the previous computer, press and release the [Shift] key, then press the
Note! You can use the [+] key of the alphanumeric section or of the numeric keypad on a US English keyboard. With a
8