Tripp Lite B060-032 owner manual Performing the Upgrade, Starting the Upgrade, Upgrade Failure

Page 32

The Firmware Upgrade Utility (continued)

Performing the Upgrade

Starting the Upgrade

To upgrade your firmware:

1.To run the downloaded Firmware Upgrade Package file, either double click the file icon, or open a command line and enter the full path to it. The Firmware Upgrade Utility Welcome screen appears.

2.Read and Agree to the License Agreement (enable the I Agree radio button).

3.Click Next to continue. The Firmware Upgrade Utility main screen appears:

The Utility inspects your installation. The devices capable of being upgraded by the package are listed in the Device List panel.

Note: 1. Although only one device type is shown in the list (B062-001-PS2, for example), all units of that type receive the upgraded.

2.B060-032U refers to the first station in a daisy-chained configuration; B060-032N refers to the chained stations.

3.A blue background behind the device name indicates that it is ready to be upgraded.

4.When the list is complete, click Next to start the upgrade.

•If you enabled Check Firmware Upgrade, the Utility compares the device’s firmware level with that of the upgrade files. If it finds that the device’s version is higher, it brings up a dialog box informing you of the situation and gives you the option to Continue or Cancel.

•If you didn’t enable Check Firmware Upgrade, the Utility installs the upgrade files without checking their version level.

•While a device group is being upgraded, the background behind its name changes to green and blinks on and off to indicate that upgrading for that device group is in progress.

•As the Upgrade proceeds, status messages appear in the Status Messages panel, and the progress toward completion is shown on the Progress bar.

•As each device update completes, its status is reported in the Status Messages panel.

•When a device group upgrade is successful, the background behind the device group name changes to pink; if a member of a device group fails to upgrade successfully, the background behind the device group name changes to red to indicate an upgrade failure in the group. Check the Status Messages to ascertain which device failed to upgrade.

5.When the upgrade for all the devices is done, click Finish to close the Utility.

Upgrade Failure

If the upgrade fails to complete successfully for all devices:

1.Click Finish to close the Firmware Upgrade Utility.

2.Start the firmware upgrade procedure again (see above).

3.When the Device List is complete, Click on the device group that the failed device belongs to in the Device List panel (see above).

4.Click Next to start the upgrade.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents NetDirector Matrix KVM Switch Port 4 User Table of Contents This package should consistHardware Requirements FeaturesIntroduction B060-032 Front View Console Interface Modules Front View B060-032 Rear ViewConsole Interface Modules O Jack B062-001-PS2B062-001-USB Power JackConsole Interface Modules Rear View Installation OverviewBefore you Begin InterfaceSingle Stage Installation Connect the Console to the Console Interface ModuleConnect the Console Interface Module to the B060-032 Connect the B060-032 to the Server Interface ModuleB062-001-PS2 B062-001-USB USB Cable ConnectionDaisy Chaining Multilevel InstallationsOverview B062-001-USB Cascading B007-008 Protocol Interface CascadingB054-001-PS2 Physical Interface Cascading Physical Interface Cascading B062-001-PS2 B022-016B054-001-PS2 B007-008 B060-032 Daisy Chaining Plus Cascading ExpansionProtocol Interface Expansion Physical Interface Expansion B054-001-PS2 B022-016Topology Considerations Basic OperationsUser Management and Security Cascaded Protocol Interface InstallationsCascaded Physical Interface Installations OSD Operation OSD OverviewOSD Main Screen Headings OSD NavigationOSD Functions Heading ExplanationF1 Goto Choice MeaningPort ID F4 ADM Clear the Name List F5 SKP Cascaded OSD Operation F8 LoutInvoking Hotkey Mode Hotkey OperationHotkey Port Control Selecting the Active PortAuto Scanning Invoking Auto ScanHotkey Summary Table Skip ModeHotkey Beeper Control Sun Keyboard Emulation Multiplatform SupportMac Keyboard Emulation Firmware Upgrade Utility IntroductionPurpose Before You BeginUpgrade Failure Performing the UpgradeStarting the Upgrade Connection Tables OSD Factory Default SettingsAppendix Clear Login Information Server Interface Modules SpecificationsConsole Interface Modules Troubleshooting Warranty RegistrationYear Limited Warranty FCC Radio/TV Interference Notice
Top Page Image Contents