Indicator Lights

Basic Operation continued

Cold-Start Your UPS: You may “cold start” your UPS and use it as a stand-alone power source when utility power is not present, providing that the UPS battery is charged. To “cold start” your UPS, press and hold the ON/OFF button until you hear a beep (about 2 seconds), then release it. The “ ” indicator light will illuminate and AC power inverted from stored battery power will be provided at its receptacles.

Shut Down Your UPS: Press and hold the ON/OFF button when AC line power is absent (i.e. during a blackout, or when the UPS is unplugged) to deactivate your UPS.

Use the MUTE/TEST button to do two things:

Silence the UPS On-Battery Alarm: Press and hold this button to silence the UPS On-Battery alarm, a series of short beeps followed by a brief pause that is activated when the UPS is providing AC power from battery. Note: When the battery is nearly depleted, the Low Battery alarm—a continuous beep that cannot be silenced—will alert you to immediately shut down connected equipment.

Run a Self-Test:Your UPS performs a self-test whenever it is first plugged in. To have it run a self-test at another time, leave your connected equipment on. With your UPS plugged in and in the UPS mode, press and hold this button until you hear a beep (about 2 seconds) then release it.

Results of a Self-Test:All the LEDs will be lit and the UPS will emit several short beeps as it momentarily switches to battery to test its charge and load capacity. The test will last at most 10 seconds. If the inverter is overloaded, the “ ” LED will stay lit and the UPS will continue to beep after the test; if this happens, remove some of the load and run the self-test again. If the batteries seem weak, the “ ” LED will stay lit and the UPS will continue to beep after the test; if this happens, let UPS charge its batteries for 12 hours and repeat the test. If the condition persists, contact Tripp Lite for service. It is likely your UPS requires a battery replacement. Tripp Lite offers a complete line of UPS System Replacement Battery Cartridges (R.B.C.). Visit Tripp Lite on the Web at www.tripplite.com/support/battery/index.cfm to locate the specific replacement battery for your UPS. CAUTION: Do not unplug your UPS to test its batteries. This will remove safe electrical grounding and may introduce a damaging surge into your network connections.

All Indicator Light descriptions apply when the UPS is plugged into an AC outlet and turned on.

LINE POWER: This green light will turn ON whenever your UPS is receiving normal AC line power. It will flash while the UPS is in CHARGE ONLY mode to indicate that the UPS will not provide battery backup during a blackout or brownout.

INTERNETOFFICE700, BCINTERNET550, BCINTERNET500, INTERNETOFFICE500, BCPERS450 specifications

Tripp Lite offers a comprehensive range of uninterruptible power supplies (UPS) designed to protect critical electronic equipment from power outages and fluctuations. Among their notable models are the INTERNETOFFICE500, BCINTERNET500, BCPERS450, BCINTERNET550, and INTERNETOFFICE700, each tailored to meet specific power needs in various settings from home offices to larger business environments.

The INTERNETOFFICE500 is a reliable UPS designed to provide battery backup and surge protection for home office devices. With a capacity of 500VA/300W, it features six NEMA 5-15R outlets, allowing multiple devices to be connected. It also incorporates a USB port for charging mobile devices and offers data line protection for dial-up, DSL, or broadband connections. Its compact design makes it easy to fit in tight spaces while ensuring that electronics remain powered during outages.

The BCINTERNET500 model mirrors many of the features of the INTERNETOFFICE500 but adds a few enhancements for business use. Like its counterpart, it provides 500VA/300W capacity and surge protection, but it also includes a built-in LCD display that provides essential information on battery status, load capacity, and more. This feature is valuable for monitoring performance and ensuring optimal operation of connected devices.

The BCPERS450 is designed for personal use, providing an ideal balance of features and compactness. It offers 450VA/250W capacity and a combination of battery backup and surge protection tailored for computers and essential home office equipment. This model is particularly advantageous for users who require reliable power for their personal computers without the need for extensive additional features.

The BCINTERNET550 enhances protection capabilities with a slightly higher capacity of 550VA/330W. It also comes with eight outlets, allowing businesses to connect more devices. Additionally, this model features both USB and RS-232 connectivity, enabling users to connect and manage the UPS efficiently through their computers.

Lastly, the INTERNETOFFICE700 provides a robust 700VA/400W capacity essential for larger setups. This model is equipped with ten outlets for extensive connectivity and features automatic voltage regulation to correct minor voltage fluctuations without switching to battery power. The INTERNETOFFICE700 also offers advanced management software that allows users to monitor power conditions and battery status through their computers.

Each model in this lineup emphasizes reliability, efficiency, and user-friendliness, making them suitable for a wide range of applications from personal use to commercial environments. Tripp Lite is committed to providing top-notch protection, ensuring that critical equipment remains operational during power disturbances.