Moxa Technologies EDS-508 manual DIN-Rail Mounting

Installing MOXA EtherDevice Switch

DIN-Rail Mounting

The aluminum DIN -Rail attachment plate should already be fixed to the back panel of EDS -508 when you take it out of the box. If you need to reattach the DIN-Rail attachment plate to EDS-508, make sure the stiff metal spring is situated towards the top, as shown in the figures below.

STEP 1:

Insert the top of the DIN-Rail into the slot just below the stiff metal spring.

STEP 2:

The DIN-Rail attachment unit will snap into place as shown below.

To remove EDS-508 from the DIN-Rail, simply reverse Steps 1 and 2 above.

MOXA EtherDevice Switch Hardware Installation Guide 2-3