10/100BaseTx Ethernet Port Connection
The 10/100BaseTX ports located on MOXA EtherDeviceTM Switch’s front panel are used to connect to Ethernet-enabled devices. Most users will choose to configure these ports for Auto MDI/MDI-Xmode, in which case the port’s pinouts are automatically adjusted depending on the type of Ethernet cable used (straight-through or cross -over), and the type of device (NIC-type or HUB/Switch-type) connected to the port.
In what follows, we give pinouts for both MDI (NIC-type) ports and MDI-X (HUB/Switch-type) ports. We also give cable wiring diagrams for straight-through and cross -over Ethernet cables.
RJ45 (8-pin, MDI) Port Pinouts
RJ45 (8-pin, MDI-X) Port Pinouts
3-10 MOXA EtherDevice Switch Hardware Installation Guide
