Motion Computing M1400 manual Set Up a Device Bluetooth Mouse

Chapter 4 Using Your Motion Tablet PC

Set Up a Device (Bluetooth Mouse)

IMPORTANT: When installing Bluetooth devices, follow the steps in this procedure before installing any software that came with the device. You may need to install application software for the device at the end of this procedure. However, do not install new Bluetooth software.

1.Check that the wireless device you are configuring has properly- installed new or fully-charged batteries.

2.Place the device in “Discoverable mode,” which allows the Tablet PC’s internal Bluetooth card to “find” the device. This information can be found in the device’s documentation.

NOTES ABOUT DEVICE DISCOVERY: Some devices require that you press a button on the device or keyboard keys to put them in the “discoverable” mode. For example, the mouse in this example requires pressing the “Connect Channel” button on the bottom of the mouse; while a Bluetooth keyboard may require pressing a key sequence on the keyboard or an On/Off or reset button.

3.Start the Bluetooth device interface by double-tapping the “My Bluetooth Places” icon in the System Tray or in the Start menu.

4.Under Bluetooth Tasks, tap the Bluetooth Setup Wizard.

5.When the Welcome to Bluetooth Setup

Wizard appears, tap the radio button beside the appropriate option. In this example, tap “I know the service I want to use and I want to find a Blue- tooth device that provides that ser- vice,” the first option.

6.Tap Next. The Bluetooth Service Selection window appears. On this window, scroll through the list of ser- vices and highlight a service. In this example, scroll down the list and hightlight Human Interface Device (HID) to set up a wireless mouse.

Motion Computing M1400 Tablet PC User Guide 50