| Chapter 4 Using Your Motion Tablet PC |
|
|
MICROPHONE | The Tablet PC contains two microphones with features that help optimize |
DESIGN AND | the sound capturing capabilities of your Tablet PC for voice recognition and |
FUNCTIONS | Voice over IP (VoIP): |
| • Array Processing or “beam forming” |
| side the angle of acceptance |
| • Noise |
| • Acoustic Echo Cancellation |
| phone pick up of the system’s speaker output and prevents feedback. |
| Focusing and Training the Microphones |
| The microphones can be focused to several |
| |
| the Tablet PC, or in the entire room. |
| Narrow Focus |
| You may want to focus the microphones to a narrow angle in a |
| environment (such as in a meeting) or for dictation or Internet phone use (for |
| Voice over |
| 1. Open the Motion Dashboard. |
| 2. Under Microphone, tap Narrow |
| Focus. The microphone now |
| has a narrow “angle of accep- |
| tance” that focuses on a spot |
| near the center of the display |
| when the Tablet PC is in an |
| upright viewing position. |
| To change the microphone focus for dictation or VoIP: |
| NOTE: Set the Microphone slider to between 50% and 75% and NOT as shown |
| in this illustration. |
| 1. Open the Motion Dashboard. |
| 2. Under Microphone, tap Narrow |
| Focus. |
| 3. Position yourself at the new |
| location where you want the |
| microphone to detect the sound. |
| 4. Tap Train. A block of text |
| appears. |
| 5. Speaking normally towards the Tablet PC microphones, read the text |
| aloud. This takes |
| the text disappears. |
| IMPORTANT: The microphones keep the new setting until you retrain them or |
| until you change the microphone to a different focus. When you change to |
| another setting (such as “Wide” to “Meeting”), the microphones return to the |
| default focus. |
|
|
| Motion Computing M1400 Tablet PC User Guide 53 |