StarTech.com NETRS2321POE instruction manual Hardware Guide, Package Contents, Front Panel

Page 4

Hardware Guide

Package Contents

•1 x Driver CD

•1 x Industrial Switch

•1 x Instruction Manual

•1 x Power Adapter

Front Panel

1

2

3

4

1.Switch to Restore Default Settings - This switch can be used to reset the product to its factory default settings. Pressing the switch using either a pen or similar tool will immediately restore the unit to its default settings.

2.RJ45 LAN Connector - 10/100Mbps Ethernet port. It supports the auto cross-over feature, and allows use of the same cable to connect to either a Hub/Switch or a host computer.

3.Heartbeat LED

4.+7~12VDC Power Input DC Jack

2

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Ethernet Device Server FCC Compliance Statement Table of Contents Package Contents Heartbeat LED +7~12VDC Power Input DC JackHardware Guide Front PanelRS-232 Connector LED IndicatorsRear Panel Configuring the Adapter Hardware installationSetting the IP Address Setting the IP Address from a Dhcp Server Setting the IP Address using a Web BrowserSetting the IP Address using the Em.exe Utility Managing the Adapter Settings\IOoverIP\Utilities\Em\Em.exe Controller Setup Menu Items Menu Item DescriptionSocket Port of Http Software Installation VSP Virtual COM Port DriverInstalling the VSP Virtual COM Port Driver Run the VSP Setup Program Page Specifications NETRS2321POENETRS2321POE Technical Support Warranty Information Limitation of Liability
Top Page Image Contents