1.Setting the IP Address from a DHCP Server
A DHCP server will automatically assign an IP address (dynamic address) as well as Subnet Mask and Gateway to this adapter. If you power up the Adapter without a fixed (static) IP address, the DHCP server will be able to assign an IP address (Note: By default, DHCP is disabled. If you wish to support DHCP, Enable it in the Adapter Setup Menu).
Note: If you will set the IP address using another method, you will need to use a static IP address. To do this, Disable DHCP (this is the default setting) in the Adapter Setup Menu.
2.Setting the IP Address using a Web Browser
Please ensure that your PC’s IP address is set to the same subnet as the adapter. If not, you will need to change your PC’s IP address from the Local Area Connection Properties menu, shown below:
Run your browser and access the product by entering the default (192.168.1.254) or current IP address into your browser’s address window. Enter the password (default has no password), then go to Change your IP Address, and make the necessary changes.
5