StarTech.com NETRS2321POE Managing the Adapter Settings, IOoverIP\Utilities\Em\Em.exe

Page 8

3.Setting the IP Address using the Em.exe Utility

The Em.exe is a Microsoft Windows based utility used to identify the adapters connected on the same subnet and network segment. To run the Em.exe utility, please insert the driver CD supplied with the Adapter. Open the program at the following location (assume the CD-ROM drive is at E):

E:\IO_over_IP\Utilities\Em\Em.exe

Managing the Adapter Settings

When you enter the Adapter Setup Menu, the following page will be available for your access. By default there is no password for entry.

Once you have entered the Controller Setup Menu and made the necessary changes, click the Update button. Also ensure that you make note of your password as you will need it to enter the setup menu again.

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Ethernet Device Server FCC Compliance Statement Table of Contents Package Contents Heartbeat LED +7~12VDC Power Input DC JackHardware Guide Front Panel Rear Panel LED Indicators RS-232 Connector Setting the IP Address Hardware installationConfiguring the Adapter Setting the IP Address from a Dhcp Server Setting the IP Address using a Web Browser\IOoverIP\Utilities\Em\Em.exe Managing the Adapter SettingsSetting the IP Address using the Em.exe Utility Controller Setup Menu Items Menu Item DescriptionSocket Port of Http Software Installation VSP Virtual COM Port DriverInstalling the VSP Virtual COM Port Driver Run the VSP Setup Program Page Specifications NETRS2321POENETRS2321POE Technical Support Warranty Information Limitation of Liability
Top Page Image Contents