Star Tech Development BR4100DC manual IP Subnet Mask, Dhcp Server, Lease Time, IP Address Pool

Page 27

25

LAN

The LAN port settings page allows you to specify a private IP address for your router’s LAN port and specify a range of IP addresses for your DHCP server to issue to your LAN clients.

Parameter

Default

Description

IP Address

192.168.2.1

This is the router’s LAN port IP address. (Your LAN

 

 

clients’ default gateway IP address.)

IP Subnet Mask

255.255.255.0

Enter the subnet mask for your LAN segment.

DHCP Server

Enabled

With the DHCP server enabled, the router will

 

 

automatically give your LAN clients an IP address.

 

 

If this feature is disabled you will have to manually

 

 

set your LAN clients’ IP addresses. (Make sure that

 

 

your LAN client is in the same subnet as the router

 

 

if you want the router to be your LAN client’s

 

 

default gateway.)

Lease Time

 

When the DHCP server is enabled, the DHCP

 

 

server will temporarily give your LAN clients an IP

 

 

address. If you specify a time period in this field,

 

 

the DHCP server will refresh your IP addresses

 

 

once that time period has expired.

IP Address Pool

 

Enter a Start IP and End IP address. Your DHCP

 

 

server will assign your LAN clients IP addresses

 

 

from this range. (If you want to assign a static/fixed

 

 

IP address to one of your LAN PCs, you will have

 

 

to choose an IP address from outside this pool.)

Domain Name

 

As an option, enter a Domain Name for your LAN.

When you are satisfied with your LAN settings, click Apply.

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Broadband Router FCC Compliance Statement Table of Contents Tools Introduction Features Before You BeginMinimum Requirements Contents Router BasicsBack Panel Status Description Front PanelThrough Cross Setting Up Your LANGetting Started Modem port is regular Modem port is uplink StraightWindows Me/98/95 Configuring Your PCsWindows XP WindowsWinNT Accessing the Router Home Navigate the Router Management Interface Time Zone Quick SetupBroadband Type Cable Modem Host NameMAC Address Fixed-IP xDSL Gateway IPSubnet Mask User Name PasswordPlease retype your password Service NamePptp Gateway Default GatewayIP Address User IDGeneral Settings Time Zone SystemRe-Enter Password Password SettingsCurrent Password New PasswordHost Address Remote ManagementWAN Domain Name Server DNS AddressSecondary DNS Address Bridge Example Bridge Mode IP Address Pool IP Subnet MaskDhcp Server Lease TimeAddress Mapping Address MappingType Virtual ServerPrivate IP Private PortExample Virtual Server Trigger Type EnabledTrigger Port Between 0Example Special Applications Firewall Block Time Access ControlEnable Client Filtering PortExample Access Control Your E-mail Address DoS ProtectionDiscard Ping from WAN RIP DefectEnable DMZ Public IP AddressClient IP Address Status Primary DNS Internet ConnectionCable/DSL GatewayFirewall Device StatusSecurity Log Security LogDhcp Client Log Dhcp Client LogRestore to Factory Defaults Configuration ToolsBackup RestoreFirmware Upgrade Firmware UpgradeReset Appendix a Find and record your computer’s IP configuration settingsAppendix B Popular Port NumbersApplication Protocol Port Number Setting a Static IP Address Appendix CWindows XP/2000 Windows NT Troubleshooting Ping an outside IP address If problems persist, try resetting the routerTest your Internet connection Ping your routerMicrosoft Internet Explorer 5.0 or higher Online Gaming ProblemsForgotten Password Remove your proxy settingsGlossary Physical Address See MAC Address Network Mask See Subnet MaskPage Technical Specifications Limitation of Liability Warranty InformationTechnical Support On-line helpRevised February 20
Top Page Image Contents