StarTech.com RACKCONV1701, RACKCONV1901 manual FCC Compliance Statement

Page 2
FCC Compliance Statement

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Instruction Manual

Image 2
Contents DE Bedienungsanleitung - de.startech.com 1U 17”/19” Rackmount LCD Console - USB - Value SeriesRACKCONV1701 RKCONV1701xx RACKCONV1901 FR Guide de lutilisateur - fr.startech.comFCC Compliance Statement How to Use Table of ContentsInstallation SpecificationsHardware Installation InstallationPackaging Contents Hardware Kit ContentsMounting the console 7. Installation is now complete 4. Install the remaining rail, repeating Steps6. Install two screws on each side of the rear console 3. Tighten the rear screws that were loosened in StepConfiguring Display Settings How to UseConnecting the Console Turning on the ConsoleTesting the Console Brightness Panel Controls and OSD FunctionsAuto tune ContrastTo adjust the position of the OSD ColorPosition To set CIE coordinates at 9300K colorRecall Power IndicatorLanguage ExitSpecifications Chassis DimensionNet Weight ConstructionRACKCONV1701 Dimensions RACKCONV1901 Dimensions Limitation of Liability Warranty InformationTechnical Support Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise